Follow us on...
Follow us on G+ Follow us on Twitter Follow us on Facebook Watch us on YouTube
Register
Results 1 to 4 of 4
  1. #1
    Status
    Offline
    s4kk1r's Avatar
    Newbie
    Join Date
    Jun 2008
    Posts
    32
    Reviews
    Read 0 Reviews
    Downloads
    8
    Uploads
    0
    Feedback Score
    0

    Question help...setting AP

    tolong bantu para mikroteker...

    ini Topologi jaringan saya

    server(192.168.200.2/27)===>RBxxx wlan AP1 (192.168.200.1/27)===>AP2 RBxxx (192.168.200.30/27)===> client(laptop)192.168.200.3/27


    server konek ke Ap1 pake wireless.

    client konek ke AP2 pake laptop lwat wireless.


    AP 1 RBxxx dgn 1 wireless.

    [admin@AP1] > interface print
    Flags: D - dynamic, X - disabled, R - running, S - slave
    # NAME TYPE MTU L2MTU
    0 R ether1 ether 1500 1600
    1 ether2 ether 1500 1600
    2 ether3 ether 1500 1600
    3 R wlan1 wlan 1500 2304


    [admin@AP1] > interface wireless print
    Flags: X - disabled, R - running

    0 R name="wlan1" mtu=1500 mac-address=00:00:00:00:00:00 arp=enabled
    ssid="ap1" wds-mode=disabled
    wds-default-bridge=none wds-ignore-ssid=no default-authentication=no
    default-forwarding=yes default-ap-tx-limit=0 default-client-tx-limit=0
    hide-ssid=yes security-profile=default


    [admin@AP1] > ip address print
    Flags: X - disabled, I - invalid, D - dynamic
    # ADDRESS NETWORK BROADCAST INTERFACE
    0 192.168.0.3/29 192.168.0.0 192.168.0.7 ether1
    1 192.168.200.1/27 192.168.200.0 192.168.200.31 wlan1


    [admin@AP1]> ip route print
    Flags: X - disabled, A - active, D - dynamic,
    C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme,
    B - blackhole, U - unreachable, P - prohibit
    # DST-ADDRESS PREF-SRC G GATEWAY DISTANCE INTE...
    0 A S 0.0.0.0/0 r 192.168.0.1 1 ether1
    1 ADC 192.168.200.0/24 192.168.200.31 0 wlan1
    2 ADC 192.168.15.0/29 192.168.15.3 0 ether1



    AP 2 RBxxx dgn 2 wireless. wlan1 sebagai station, wlan2 sebagi hotspot dan AP

    [admin@AP2] > int print
    Flags: D - dynamic, X - disabled, R - running, S - slave
    # NAME TYPE MTU L2MTU
    0 R ether1 ether 1500 1526
    1 ether2 ether 1500 1522
    2 ether3 ether 1500 1522
    3 R Client wlan 1500 2304
    4 R bridge1 bridge 1500 1526
    5 AP wlan 1500 2304
    6 R Hotspot wlan 1500 2304


    [admin@AP2] > interface wireless print
    Flags: X - disabled, R - running
    0 R name="Client" mtu=1500 mac-address=00:00:00:00:00:00 arp=enabled
    interface-type=Atheros AR5212 mode=station ssid="ap1"
    frequency=2422 band=2.4ghz-b scan-list=default antenna-mode=ant-a
    wds-mode=disabled wds-default-bridge=none wds-ignore-ssid=no
    default-authentication=yes default-forwarding=yes default-ap-tx-limit=0
    default-client-tx-limit=0 hide-ssid=no security-profile=default
    compression=no

    1 name="AP" mtu=1500 mac-address=00:00:0:00:00:03 arp=enabled
    master-interface=Hotspot ssid="Ap2" wds-mode=disabled
    wds-default-bridge=none wds-ignore-ssid=no default-authentication=no
    default-forwarding=yes default-ap-tx-limit=0 default-client-tx-limit=0
    hide-ssid=yes security-profile=default

    2 R name="Hotspot" mtu=1500 mac-address=00:00:00:00:00:00 arp=enabled
    interface-type=Atheros AR5413 mode=ap-bridge ssid="Hotspot"
    frequency=2417 band=2.4ghz-b scan-list=default antenna-mode=ant-a
    wds-mode=disabled wds-default-bridge=none wds-ignore-ssid=no
    default-authentication=yes default-forwarding=no default-ap-tx-limit=0
    default-client-tx-limit=0 hide-ssid=no security-profile=default
    compression=no



    [admin@AP2] > ip address print
    Flags: X - disabled, I - invalid, D - dynamic
    # ADDRESS NETWORK BROADCAST INTERFACE
    0 88.88.88.88/27 88.88.88.64 88.88.88.95 bridge1
    1 192.168.200.30/27 192.168.200.0 192.168.200.31 Client


    [admin@AP2] > interface bridge port print
    Flags: X - disabled, I - inactive, D - dynamic
    # INTERFACE BRIDGE PRIORITY PATH-COST HORIZON
    0 ether1 bridge1 0x80 10 none
    1 Hotspot bridge1 0x80 10 none

    [admin@AP2] > ip route print
    Flags: X - disabled, A - active, D - dynamic,
    C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme,
    B - blackhole, U - unreachable, P - prohibit
    # DST-ADDRESS PREF-SRC GATEWAY-STATE GATEWAY DISTANCE INTERFACE
    0 A S 0.0.0.0/0 reachable 192.168..200.1 1 Client
    1 ADC 88.88.88.64/27 88.88.88.88 0 bridge1
    2 ADC 192.168.200.0/27 192.168.200.30 0 Client


    bagimana settingan tambahan di AP2 supaya client bisa konek pake ip 192.168.200.3/27, sedangkan AP2 sudah difungsikan sebagai hotspot.
    makasih sebelumnya
    Last edited by s4kk1r; 25-07-2009 at 10:33. Reason: salah ketik

  2. #2
    Status
    Offline
    s4kk1r's Avatar
    Newbie
    Join Date
    Jun 2008
    Posts
    32
    Reviews
    Read 0 Reviews
    Downloads
    8
    Uploads
    0
    Feedback Score
    0
    Click here to enlarge Originally Posted by s4kk1r Click here to enlarge
    tolong bantu para mikroteker...

    ini Topologi jaringan saya

    server(192.168.200.2/27)===>RBxxx wlan AP1 (192.168.200.1/27)===>AP2 RBxxx (192.168.200.30/27)===> client(laptop)192.168.200.3/27


    server konek ke Ap1 pake wireless.

    client konek ke AP2 pake laptop lwat wireless.


    AP 1 RBxxx dgn 1 wireless.

    [admin@AP1] > interface print
    Flags: D - dynamic, X - disabled, R - running, S - slave
    # NAME TYPE MTU L2MTU
    0 R ether1 ether 1500 1600
    1 ether2 ether 1500 1600
    2 ether3 ether 1500 1600
    3 R wlan1 wlan 1500 2304


    [admin@AP1] > interface wireless print
    Flags: X - disabled, R - running

    0 R name="wlan1" mtu=1500 mac-address=00:00:00:00:00:00 arp=enabled
    ssid="ap1" wds-mode=disabled
    wds-default-bridge=none wds-ignore-ssid=no default-authentication=no
    default-forwarding=yes default-ap-tx-limit=0 default-client-tx-limit=0
    hide-ssid=yes security-profile=default


    [admin@AP1] > ip address print
    Flags: X - disabled, I - invalid, D - dynamic
    # ADDRESS NETWORK BROADCAST INTERFACE
    0 192.168.0.3/29 192.168.0.0 192.168.0.7 ether1
    1 192.168.200.1/27 192.168.200.0 192.168.200.31 wlan1


    [admin@AP1]> ip route print
    Flags: X - disabled, A - active, D - dynamic,
    C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme,
    B - blackhole, U - unreachable, P - prohibit
    # DST-ADDRESS PREF-SRC G GATEWAY DISTANCE INTE...
    0 A S 0.0.0.0/0 r 192.168.0.1 1 ether1
    1 ADC 192.168.200.0/24 192.168.200.31 0 wlan1
    2 ADC 192.168.15.0/29 192.168.15.3 0 ether1



    AP 2 RBxxx dgn 2 wireless. wlan1 sebagai station, wlan2 sebagi hotspot dan AP

    [admin@AP2] > int print
    Flags: D - dynamic, X - disabled, R - running, S - slave
    # NAME TYPE MTU L2MTU
    0 R ether1 ether 1500 1526
    1 ether2 ether 1500 1522
    2 ether3 ether 1500 1522
    3 R Client wlan 1500 2304
    4 R bridge1 bridge 1500 1526
    5 AP wlan 1500 2304
    6 R Hotspot wlan 1500 2304


    [admin@AP2] > interface wireless print
    Flags: X - disabled, R - running
    0 R name="Client" mtu=1500 mac-address=00:00:00:00:00:00 arp=enabled
    interface-type=Atheros AR5212 mode=station ssid="ap1"
    frequency=2422 band=2.4ghz-b scan-list=default antenna-mode=ant-a
    wds-mode=disabled wds-default-bridge=none wds-ignore-ssid=no
    default-authentication=yes default-forwarding=yes default-ap-tx-limit=0
    default-client-tx-limit=0 hide-ssid=no security-profile=default
    compression=no

    1 name="AP" mtu=1500 mac-address=00:00:0:00:00:03 arp=enabled
    master-interface=Hotspot ssid="Ap2" wds-mode=disabled
    wds-default-bridge=none wds-ignore-ssid=no default-authentication=no
    default-forwarding=yes default-ap-tx-limit=0 default-client-tx-limit=0
    hide-ssid=yes security-profile=default

    2 R name="Hotspot" mtu=1500 mac-address=00:00:00:00:00:00 arp=enabled
    interface-type=Atheros AR5413 mode=ap-bridge ssid="Hotspot"
    frequency=2417 band=2.4ghz-b scan-list=default antenna-mode=ant-a
    wds-mode=disabled wds-default-bridge=none wds-ignore-ssid=no
    default-authentication=yes default-forwarding=no default-ap-tx-limit=0
    default-client-tx-limit=0 hide-ssid=no security-profile=default
    compression=no



    [admin@AP2] > ip address print
    Flags: X - disabled, I - invalid, D - dynamic
    # ADDRESS NETWORK BROADCAST INTERFACE
    0 88.88.88.88/27 88.88.88.64 88.88.88.95 bridge1
    1 192.168.200.30/27 192.168.200.0 192.168.200.31 Client


    [admin@AP2] > interface bridge port print
    Flags: X - disabled, I - inactive, D - dynamic
    # INTERFACE BRIDGE PRIORITY PATH-COST HORIZON
    0 ether1 bridge1 0x80 10 none
    1 Hotspot bridge1 0x80 10 none

    [admin@AP2] > ip route print
    Flags: X - disabled, A - active, D - dynamic,
    C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme,
    B - blackhole, U - unreachable, P - prohibit
    # DST-ADDRESS PREF-SRC GATEWAY-STATE GATEWAY DISTANCE INTERFACE
    0 A S 0.0.0.0/0 reachable 192.168..200.1 1 Client
    1 ADC 88.88.88.64/27 88.88.88.88 0 bridge1
    2 ADC 192.168.200.0/27 192.168.200.30 0 Client


    bagimana settingan tambahan di AP2 supaya client bisa konek pake ip 192.168.200.3/27, sedangkan AP2 sudah difungsikan sebagai hotspot.
    makasih sebelumnya


    Masalah Terselesaikan


    Settingan AP 1

    1. Buat interface eoip

    [admin@AP1] > interface eoip print
    Flags: X - disabled, R - running
    0 R name="EoIP" mtu=1500 l2mtu=65535 mac-address=FE:5F:7D:59:0A:3B
    arp=enabled remote-address=192.168.200.30 tunnel-id=100

    2. Buat Bridge

    [admin@AP1] /interface bridge> print
    Flags: X - disabled, R - running
    0 R name="Bridge1" mtu=1500 l2mtu=2304 arp=enabled
    mac-address=FE:5F:7D:59:0A:00 protocol-mode=rstp priority=0x8000
    auto-mac=yes admin-mac=00:00:00:00:00:00 max-message-age=20s
    forward-delay=15s transmit-hold-count=6 ageing-time=5m

    3. Buat Port antara wlan1 dan EoIp yang dibuat tadi

    [admin@AP1] /interface bridge> port print
    Flags: X - disabled, I - inactive, D - dynamic
    # INTERFACE BRIDGE PRIORITY PATH-COST HORIZON
    0 wlan1 Bridge1 0x80 10 none
    1 EoIP Bridge1 0x80 10 none



    Settingan AP 2


    [admin@AP2] > interface eoip print
    Flags: X - disabled, R - running
    0 R name="EoIP1" mtu=1500 l2mtu=65535 mac-address=FE:9C:38Click here to enlargeE:A0:6E arp=enabled remote-address=192.168.200.1 tunnel-id=100



    [admin@AP2] > interface bridge print
    Flags: X - disabled, R - running
    0 R name="bridge1" mtu=1500 l2mtu=1526 arp=enabled mac-address=00:0C:42:00:63:00 protocol-mode=rstp priority=0x8000
    auto-mac=yes admin-mac=00:00:00:00:00:00 max-message-age=20s forward-delay=15s transmit-hold-count=6 ageing-time=5m

    1 R name="bridge2" mtu=1500 l2mtu=65535 arp=enabled mac-address=FE:9C:38Click here to enlargeE:A0:6E protocol-mode=rstp priority=0x8000
    auto-mac=yes admin-mac=00:00:00:00:00:00 max-message-age=20s forward-delay=15s transmit-hold-count=6 ageing-time=5m

    [admin@AP2] > interface bridge port print
    Flags: X - disabled, I - inactive, D - dynamic
    # INTERFACE BRIDGE PRIORITY PATH-COST HORIZON
    0 ether1 bridge1 0x80 10 none
    1 Hotspot bridge1 0x80 10 none
    2 EoIP1 bridge2 0x80 10 none
    3 wlan1 bridge2 0x80 10 none


    tanks...

  3. #3
    Status
    Offline
    dencow's Avatar
    Forum Guru
    Join Date
    Jan 2008
    Posts
    1,728
    Reviews
    Read 0 Reviews
    Downloads
    0
    Uploads
    0
    Feedback Score
    1 (100%)
    wah salut Click here to enlarge
    hebat.... tak kenal menyerah... gak langsung main tanya tanpa ngoprek dulu...

  4. #4
    Status
    Offline
    gundala's Avatar
    Member Super Senior
    Join Date
    Dec 2008
    Posts
    532
    Reviews
    Read 0 Reviews
    Downloads
    0
    Uploads
    0
    Feedback Score
    0
    Click here to enlargeClick here to enlargeClick here to enlarge salutttt

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •