Follow us on...
Follow us on G+ Follow us on Twitter Follow us on Facebook Watch us on YouTube
Register
Results 1 to 9 of 9
  1. #1
    Status
    Offline
    wp11b's Avatar
    Newbie
    Join Date
    Jul 2007
    Posts
    43
    Reviews
    Read 0 Reviews
    Downloads
    0
    Uploads
    0
    Feedback Score
    0

    bonding need help

    guys...mohon sharing yg udah implementasi bonding dunk...
    gini gua pake rb532 pake 2 wireless.
    wireless setup AP bridge - station
    test ptp setiap wireless 1 jalur dapt 10mbps... jadi logika gua kalo maen bonding bisa dpt 20mbps...
    sebelumnya gua buat eoip antar wireless, jadi ada 2 interface eoip.
    gua buat interface bonding dengan mode balance-rr, slave : eoip1,eoip2.

    test bandwidth lewat ip bonding cuma dapat 5mbps....
    please share

  2. #2
    Status
    Offline
    d3v4's Avatar
    Forum Guru
    Join Date
    Jul 2007
    Location
    di alam baka
    Posts
    1,015
    Reviews
    Read 0 Reviews
    Downloads
    0
    Uploads
    0
    Feedback Score
    0
    maap boss..

    blom pernah pake bonding

    klo bridge normal dapet berapa ??

  3. #3
    Status
    Offline
    wp11b's Avatar
    Newbie
    Join Date
    Jul 2007
    Posts
    43
    Reviews
    Read 0 Reviews
    Downloads
    0
    Uploads
    0
    Feedback Score
    0
    ayo....dunk yg pernah bonding 2 wireless.sharenya

  4. #4
    Status
    Offline
    wp11b's Avatar
    Newbie
    Join Date
    Jul 2007
    Posts
    43
    Reviews
    Read 0 Reviews
    Downloads
    0
    Uploads
    0
    Feedback Score
    0
    konfigurasi gua kaya gini nih....lom bisa jalan.

    [admin@MikroTik] interface> pr
    Flags: X - disabled, D - dynamic, R - running
    # NAME TYPE RX-RATE TX-RATE MTU
    0 R ether1 ether 0 0 1500
    1 R wlan1 wlan 0 0 1500
    2 R wlan2 wlan 0 0 1500
    3 R wds1 wds 0 0 1500
    4 R wds2 wds 0 0 1500
    5 R bridge1 bridge 0 0 1500
    6 R bridge2 bridge 0 0 1500
    7 R eoip-tunnel2 eoip-tunnel 0 0 1500
    8 R bonding1 bonding 0 0 1500
    9 R eoip-tunnel1 eoip-tunnel 0 0 1500

    [admin@MikroTik] interface bonding> pr
    Flags: X - disabled, R - running
    0 R name="bonding1" mtu=1500 mac-address=FE:2CClick here to enlargeB:B5:83:4D arp=enabled
    slaves=eoip-tunnel1,eoip-tunnel2 mode=balance-rr primary=none
    link-monitoring=none arp-interval=100ms mii-interval=100ms
    down-delay=0s up-delay=0s lacp-rate=30secs


    0 R name="wlan1" mtu=1500 mac-address=00:15:6D:63:29:88 arp=enabled
    disable-running-check=no interface-type=Atheros AR5413
    radio-name="00156D632988" mode=bridge ssid="ERA" area=""
    frequency-mode=superchannel country=no_country_set antenna-gain=0
    frequency=2462 band=2.4ghz-b scan-list=default rate-set=default
    supported-rates-b=1Mbps,2Mbps,5.5Mbps,11Mbps
    supported-rates-a/g=6Mbps,9Mbps,12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,
    54Mbps
    basic-rates-b=1Mbps basic-rates-a/g=6Mbps max-station-count=2007
    ack-timeout=dynamic tx-power-mode=default noise-floor-threshold=default
    periodic-calibration=default periodic-calibration-interval=60
    burst-time=disabled dfs-mode=none antenna-mode=ant-a wds-mode=static
    wds-default-bridge=none wds-default-cost=100 wds-cost-range=50-150
    wds-ignore-ssid=no update-stats-interval=disabled
    default-authentication=yes default-forwarding=yes default-ap-tx-limit=0
    default-client-tx-limit=0 proprietary-extensions=post-2.9.25
    hide-ssid=no security-profile=default disconnect-timeout=3s
    on-fail-retry-time=100ms hw-retries=15 preamble-mode=both
    compression=no allow-sharedkey=no

    [admin@MikroTik] interface bridge port> pr
    Flags: X - disabled, I - inactive, D - dynamic
    # INTERFACE BRIDGE PRIORITY PATH-COST
    0 wlan1 bridge1 128 10
    1 wds2 bridge1 128 10
    2 wlan2 bridge2 128 10
    3 wds1 bridge2 128 10

  5. #5
    Status
    Offline
    diens_07's Avatar
    Baru Gabung
    Join Date
    May 2008
    Posts
    1
    Reviews
    Read 0 Reviews
    Downloads
    0
    Uploads
    0
    Feedback Score
    0

    setelah bonding Client gak jalan

    ip add
    speda1 192.168.1.100/24 gateway 192.168.1.1
    speda2 192.168.2.100/24 gateway 192.168.2.1
    lokal 192.168.0.1/24

    bagaimana cara bondingnya dan konfigurasi gateway serta routingnyanya ....help....help... thanks
    Last edited by diens_07; 06-05-2008 at 08:56.

  6. #6
    Status
    Offline
    r52h's Avatar
    Newbie
    Join Date
    Jul 2007
    Posts
    46
    Reviews
    Read 0 Reviews
    Downloads
    0
    Uploads
    0
    Feedback Score
    0
    Untuk wireless mode nya pakai ap-bridge dan station.
    Jangan pakai bridge dan station.

    Untuk selanjutnya sudah benar menggunakan eoip dan nanti dibuat bonding dengan mode balance-rr utk eoip1 (wlan1) dan eoip2 (wlan2). Bridge dari ethernet bisa langsung menggunakan port bonding1 dan ether1.

    Saya disini sudah coba menggunakan wireless 5 Ghz menggunakan 2 buah RB600 hasilnya luar biasa ... hehe bisa 20mbps UP /80 mbps DOWN ke interface router saya. Tapi jaraknya memang tidak terlalu jauh cuma sekitar 1 km.

  7. #7
    Status
    Offline
    wp11b's Avatar
    Newbie
    Join Date
    Jul 2007
    Posts
    43
    Reviews
    Read 0 Reviews
    Downloads
    0
    Uploads
    0
    Feedback Score
    0
    yup....di forum sebelah juga dah pernah ada yg coba dan berhasil.

    tp konfigurasi wlan1 dan wlan2 di kedua sisi harus sama dari ssid dan chanell...
    tp lom sempet nyoba sih....

  8. #8
    Status
    Offline
    monoxs's Avatar
    Calon Member
    Join Date
    Mar 2008
    Posts
    76
    Reviews
    Read 0 Reviews
    Downloads
    0
    Uploads
    0
    Feedback Score
    0
    kalau kalau kita bandingkan dengan load balancing
    pencapiaan angka angka mana yang bagus

  9. #9
    Status
    Offline
    Lebmen's Avatar
    Newbie
    Join Date
    Oct 2011
    Posts
    21
    Reviews
    Read 0 Reviews
    Downloads
    1
    Uploads
    0
    Feedback Score
    0
    berarti fungsi wirelles bonding ini , untuk menaikkan trouhgput ya gan ?

 

 

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Similar Threads

  1. VRRP Ato Load Balancing ato Bonding
    By pedro6161 in forum General Networking
    Replies: 6
    Last Post: 03-03-2008, 11:43

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •