I need to add a hotspot to a VRF, but when I add it to the VRF the login page becomes inaccessible and I'm stuck.
I found a related forum post on this, while the solutions is explained I'm not sure how to achieve this, anyone can help?
Ref forum post viewtopic.php?t=97469
Hopefully someone will get this and could help suggest the settings to add to get this working.1. Firstly, it is important to understand what is the source of this problem.2. Now, the solution becomes obvious. We need to:
- The hotspot relies on two built-in services: DNS and Web server.
- When the interface is placed in the vrf, every packet entering the router will be marked with the routing-mark of that vrf.
- VRF routing table doesn't have access to the main routing table.
- Built-in services are accessible from the main routing table only.
- remove VRF marking from packets going to DNS server on the router,
- remove VRF marking from packets going to WEB server on the router,
- mark the packets going out from the DNS to public DNS server with the vrf mark,
- mark the packets from the router's web server with the vrf mark.
Running ROS 7.14.1 on RB5009