pppoe on wan 1 and wan 2
dhcp on lan
everything works well but when wan1 and wan2 modem are reset from the isp remotely they enable dhcp and in addresses i can see 192.168.1.xx for wan1 and wan2
to stop this either i do vlan or change my ip range or firewall
firewall that i have tried
Code: Select all
/ip firewall filter add chain=input in-interface=WAN_1 protocol=udp dst-port=67-68 action=drop comment="Below is to drop Dhcp from Wan side"
same in raw for wan1 wan2 and pppoe both
in dhcp client added wan1 and wan2 and use peer dns and default route = no