Hi Guys,
i have a very strange issue. I am using shilded RJ45 CAT5e Plugs that i crimp with a KNIPPEX Tool. If i insert the plug into the WAP60G it shows 1 GBit/s, but when i touch the cable (press it deeper into the WAP60G Unit), it goes down to 100 MBit/s. If i pull on the cable, and restart the PoE-Port on the Switch it came back with 1 GBit/s.
I have recrimped the plug, but the issue still exists.
Do i have bad plugs or is it the jack?
Is anyone else seeing same issues?