I have a CRS326-24G-2S+IN device booting to RouterOS and working as I want with the following simple configuration. I want to switch over to SwitchOS. I need some help making this same exact configuration in SwitchOS. Any help would be appreciated. Thank you.
# jan/02/1970 06:36:49 by RouterOS 6.48.6
# model = CRS326-24G-2S+
/interface bridge
add name=bridge vlan-filtering=yes
/interface bridge port
add bridge=bridge interface=ether1
add bridge=bridge interface=ether2 pvid=20
add bridge=bridge interface=ether3 pvid=20
add bridge=bridge interface=ether4 pvid=30
add bridge=bridge interface=ether5 pvid=40
add bridge=bridge interface=ether6 pvid=50
/interface bridge vlan
add bridge=bridge tagged=ether1 untagged=ether2,ether3 vlan-ids=20
add bridge=bridge tagged=ether1 untagged=ether4 vlan-ids=30
add bridge=bridge tagged=ether1 untagged=ether5 vlan-ids=40
add bridge=bridge tagged=ether1 untagged=ether6 vlan-ids=50
/system identity
set name=CRS326-SW
/system routerboard settings
set boot-os=router-os
/system swos
set allow-from-ports="p1,p2,p3,p4,p5,p6,p7,p8,p9,p10,p11,p12,p13,p14,p15,p16,p\
17,p18,p19,p20,p21,p22,p23,p24,p25,p26" identity=RouterOS