Hi All,
I think it sounds stupid, but I just want to double confirm.
Scenario Ether=WAN1 , Ether2=WAN2 , Ether3,4,5=Bridge (VLAN1,VLAN10,VLAN20,VLAN30).
If I want VLAN1 user to use WAN1, and VLAN10,20,30 to use WAN2, is it possible to be done in firewall > NAT?
Chain: scr-nat
Src. address: 172.16.0.0/24 (VLAN1)
Out. Interface: WAN1
Action: masquerade
Chain: scr-nat
Src. address: 172.16.10.0/24, 172.16.20.0/24, 172.16.30.0/24(VLAN10,20,30)
Out. Interface: WAN2
Action: masquerade
So user in VLAN1 wont share the bandwidth with user in VLAN10,20,30.
Is it possible to work?
Thanks.