I can create a path from cli, and it works fine, however the path does not display in winbox.
Conversely, if I create a path in winbox, it does not work, and export from the cli is broken.
See here:
KND-PVST-Primary made in CLI, KND-PVST-Pri made in winbox
Code: Select all
/mpls/traffic-eng/path> export
# 2024-04-26 08:47:12 by RouterOS 7.14.3
# software id = MEBV-QCPD
#
# model = RB4011iGS+
/mpls traffic-eng path
add disabled=no hops="" name=Dynamic use-cspf=yes
add disabled=no hops="10.255.0.225/strict,10.255.1.4/strict,10.255.1.1/strict,10.255.2.60/strict,10.255.2.57/strict,10.255.2.44/strict,10.255.2.41/strict,10.255.2.28/strict,10.255.2.25/strict,10.255.0.66/strict,10.255.0.65/strict" name=KND-PVST-Primary use-cspf=no
add disabled=no hops=,,,,,,,,,, name=KND-PVST-Pri use-cspf=no