I use my test HEX router!
I have a running 7.13.5 with a lot config.
I made a normal firmware update to version 7.14.3.
All is ok.
Then i use system->resetconfig and point the "run after reset" to my version7 script file.
After pressing "reset config" it reboot but came up with errors and no config.
The error is only this: "error while running run-after-reset script: no such item"
EDIT-240424
Code: Select all
The problem was this entry:
/port set 0 name=serial0
From the changelog v.7.14.0 i see this:
port - removed bogus serial port on RB750Gr3, RB760iGS and RBM11G devices;
After i have removed the line all was running ok again.