Latest stable release, 3x HAP AX3 (CAPS client) + RB5009UPr (CAPS manager) with some additional CRS312/CRS305 switches in service.
Client: up to date iPhone 15 Pro Max (among others)
When I connect 2.4GHz or 5GHz using good WiFi reception everything is fine.
However, when I move to a room where the signal quality is slightly worse, my client gets roamed to another HAP, which is one story lower in the building.
After that, the client is almost immediately forced to roam back to the previous AP, and then again to the HAP one story lower.
After these three roamings, the client disconnects and switches to 5G cellular to maintain an Internet connection.
I did not notice this behavior few weeks back. Nevertheless, something could be off with my config as I upgraded my CAPSman device from an L009UiGS to a more powerful RB5009UPr, connected over the Mikrotik passive SFP 10/25GBE cable (was previously 1GBE with the L009UiGS).
Here you can see the relevant log entries (MAC removed for obvious reasons ):
Furthermore, I still get warnings about "disconnected, SA Query timeout, signal strength -78", although they have become fewer after enabling "FT" and "FT over DS" for every WiFi interface.
Are these issues known? What shall I try?