First off, Im fairly inexperienced with Mikrotik and dont do any heavy magic with it, use it just as a simple ap and internet router.
My setup was as follows:
ISP GPON -> ethernet hAP ac2 with NAT -> ethernet to PC and wi-fi for my room
I was trying to reconfig my wi-fi settings through a browser, connecting to the default 192.161.88.1 address, so I reset the passwords for wi-fi and changed the SSID and also disabled NAT. I dont remember if I rebooted the router afterwards (or if it asks for a reboot on its own). Then I decided to check for updates which I hadnt done in a very long time (probably more than 2 years). It downloaded the update (I dont remember which exact version it was, but I chose the latest stable release). It went into a reboot but didnt seem to come back online after a while (all front lights were off).
Then I unplugged/plugged the cable, it came back, I could access it through the browser for a bit, but I think I changed some minor thing and wanted to reboot again (it was probably the NAT, I dont remember the exact order of when I actually disabled it), and it never came back. Ive tried resetting it multiple times, the lights do come on and the reset procedure cues are there (usr light blinking, etc), but its not actually detected, network icon stays on "Identifying..." indefinitely. Tried Winbox and Netinstall too, no help (though Im not sure if the connection settings were correct, so need more guidance with this).
All cables, PC ports and connecting straight to the ISP GPON have been checked and do work. Ive heard about the 300 second reset, but its impossible to hold that crappy button for that long without it slipping or just fatigue taking over.
Im on Windows 10 if that matters.
What options do I have?
Thanks.