I'm doing some test with mark routing settings.
My scenario:
ADDRESS NETWORK INTERFACE
10.10.10.1/24 10.10.10.0 vlan10
Route Table
DST-ADDRESS GATEWAY DISTANCE ROUTING TABLE
0.0.0.0/0 185.xxx.xxx.1%vrrp1 2 via-vrrp1
Code: Select all
ip/firewall/nat/
chain=srcnat action=masquerade out-interface=vrrp1 log=no log-prefix=""
ip/firewall/mangle/
chain=prerouting action=mark-routing new-routing-mark=via-vrrp1 passthrough=yes in-interface=vlan10
I tried to add new routes to specific routing table, but it doesn't work.
Is this behavior normal?
In this case, how can I achieve to access to these marking routing interface?
Thanks you.