After removing my mobile phone from Microtik CCR1036-12G-4S, USB port, the RouterOS always show it, no matter i reboot CCR1036,
shut if off and turn on, reset USB power, restore whole system from backup, it just stays there not able to be removed.
I Google the post on 2014, said the only way is to do netinstall, but the tutorial link gone. After 10 years, still only way is to netinstall to remove a plug and play usb device? Any help, please?
Press F1 for help
[godel.chen@FairayRouter] > /system resource usb print value-list
device: 1-0
vendor: Linux 5.6.3 ehci_hcd
name: Tile-Gx EHCI
serial-number: tilegx-ehci.0
vendor-id: 0x1d6b
device-id: 0x0002
speed: 480
ports: 1
usb-version: 2.00
flags:
USB Device Lives On & Not Able to Be Removed
You do not have the required permissions to view the files attached to this post.
Re: USB Device Lives On & Not Able to Be Removed
This is the "usb root hub", the router side of the USB bus. It was always there, also before you connected your phone. You cannot remove it.
Re: USB Device Lives On & Not Able to Be Removed
I just netinstalled my CCR1036 and restore my configuration...Thanks. ^__^This is the "usb root hub", the router side of the USB bus. It was always there, also before you connected your phone. You cannot remove it.
No wonder after i netinstall it the device is still there...
Last edited by godel0914 on Sat Mar 30, 2024 7:24 pm, edited 1 time in total.
Re: USB Device Lives On & Not Able to Be Removed
Thanks, it seems Mikrotik is the vendor..."vendor-id: 0x1d6b"
Re: USB Device Lives On & Not Able to Be Removed
Code: Select all
1d6b Linux Foundation
0001 1.1 root hub
0002 2.0 root hub
0003 3.0 root hubWho is online
Users browsing this forum: No registered users and 6 guests