hAP ax3 temperature at 58-60 degrees...
Greetings. Tell me, MikroTik hAP ax3, is the temperature at 58-60 degrees normal at work? CPU usage ranges from 5 to 35%. There are no special loads and rules. I am grateful in advance.
Re: hAP ax3 temperature at 58-60 degrees...
yes, it is normal
Re: hAP ax3 temperature at 58-60 degrees...
If such a temperature is the norm, then how can we explain the appearance of errors such as in the screenshot? I have some suggestions that the reboot is due to overheating of the processor, the frequency is once every 3-4 days... I am grateful in advance for your help.
You do not have the required permissions to view the files attached to this post.
Re: hAP ax3 temperature at 58-60 degrees...
I have some suggestions that the reboot is due to overheating of the processor, the frequency is once every 3-4 days...
The suggestion you are mentioning goes directly against the log line saying "out of memory condition was detected" ... which indicates a memory leak (and there are reports that on certain -ac devices this does happen).
I've never seen a case where CPU overheating would "invent" otherwise sensible error messages saying something different ...
Re: hAP ax3 temperature at 58-60 degrees...
This is probably true-memory overflow, and subsequent reboot in order to clear it (at the moment, the rest of the memory is 30-35 MB)
Re: hAP ax3 temperature at 58-60 degrees...
And to counter the other argument: CPU temperatures can easily reach 80-90C without any noticeable performance issues. Military grade components go even higher.
Not that you want to touch it at that temperature, that's something else ...
Not that you want to touch it at that temperature, that's something else ...
Re: hAP ax3 temperature at 58-60 degrees...
Can this be real? Hap ax3 has 1GB of RAM.This is probably true-memory overflow, and subsequent reboot in order to clear it (at the moment, the rest of the memory is 30-35 MB)
Re: hAP ax3 temperature at 58-60 degrees...
Why not ?
A limit is a limit, how far away it may appear to be.
I have a 16Gb laptop, with 1 wrong setting in a certain data-analysis tool, I can fill that within 5 minutes and the application crashes.
(my previous laptop had 24Gb, same problem could be seen there. Been there, done that)
An inspection of what the config of that device is, is the only solution here.
A limit is a limit, how far away it may appear to be.
I have a 16Gb laptop, with 1 wrong setting in a certain data-analysis tool, I can fill that within 5 minutes and the application crashes.
(my previous laptop had 24Gb, same problem could be seen there. Been there, done that)
An inspection of what the config of that device is, is the only solution here.
Re: hAP ax3 temperature at 58-60 degrees...
It turns out that it is possible, and most likely the manufacturer himself cannot say why this is happening. For the sake of experiment, I rebooted the router-650 MB of memory, after 3-4 days there will be 25-35 MB left, and so on, judging by the logs. The most interesting thing is that in hAPac for 6 years I didn't even know about such a problem, apparently v7 turned out to have a huge bunch of problems and glitches.Can this be real? Hap ax3 has 1GB of RAM.This is probably true-memory overflow, and subsequent reboot in order to clear it (at the moment, the rest of the memory is 30-35 MB)
Re: hAP ax3 temperature at 58-60 degrees...
I have 1 AX3 at home, 5 with a customer.
NONE experience this behavior.
All are at least at 7.14 or 7.15beta.
Show the config or stop speculating.
NONE experience this behavior.
All are at least at 7.14 or 7.15beta.
Show the config or stop speculating.
Re: hAP ax3 temperature at 58-60 degrees...
Not to defend the manufacturer, but unless you post your current configuration (with personal/sensible data masked/removed) here on the forum for other members to review and/or open a ticket with official support, it seems to me unproved that the manufacturer, the hardware or software (as opposed to some possible mis-configuration of the device) can be pinpointed as having the responsibility for your issue.
The Ax3 is a common enough device, and has more than enough memory (1 GB) to deal with most setups.
While there is always the possibility of a hardware issue on your specific device or software issue in connection with your specific (even if apparently perfectly correct) configuration, there is no way to know the actual cause without some more data.
That latest versions of 7 have a number of issues, particularly with low memory devices, is no secret, but given the amount of Ax3's out there there would be tens or hundreds of similar reports if the issue is caused by some "structural" defect in RoS 7 or in the Ros 7 applied to an Ax3 device.
In the past (regardless if with running version 6 or 7) there have been similar reports of "memory leaks" and most of them were connected with particularly complex configuration.
It is entirely possible that a recent 7.13+ version has a few (actually many more than a few) corners that need to be rounded, so if you are running one of those you can try using an older, more tested version *like* 7.12.1, if you don't need any of the new features introduced in later versions and see if the issue persists.
I can understand your frustration and the urge to rant about it, but it seems to me that it won't make you in any way nearer to (hopefully) finding a solution or workaround.
The Ax3 is a common enough device, and has more than enough memory (1 GB) to deal with most setups.
While there is always the possibility of a hardware issue on your specific device or software issue in connection with your specific (even if apparently perfectly correct) configuration, there is no way to know the actual cause without some more data.
That latest versions of 7 have a number of issues, particularly with low memory devices, is no secret, but given the amount of Ax3's out there there would be tens or hundreds of similar reports if the issue is caused by some "structural" defect in RoS 7 or in the Ros 7 applied to an Ax3 device.
In the past (regardless if with running version 6 or 7) there have been similar reports of "memory leaks" and most of them were connected with particularly complex configuration.
It is entirely possible that a recent 7.13+ version has a few (actually many more than a few) corners that need to be rounded, so if you are running one of those you can try using an older, more tested version *like* 7.12.1, if you don't need any of the new features introduced in later versions and see if the issue persists.
I can understand your frustration and the urge to rant about it, but it seems to me that it won't make you in any way nearer to (hopefully) finding a solution or workaround.
Re: hAP ax3 temperature at 58-60 degrees...
Code: Select all
# 2024-03-29 18:36:08 by RouterOS 7.14.2
# software id = DUKC-5YI2
#
# model = C53UiG+5HPaxD2HPaxD
# serial number = HEX091TBKZQ
/interface bridge
add name=bridge1
/interface ethernet
set [ find default-name=ether1 ] comment="cAP AX+Synology"
set [ find default-name=ether2 ] comment=WAN
set [ find default-name=ether3 ] comment="Samsung TV"
set [ find default-name=ether4 ] comment="Zhenyulka "
set [ find default-name=ether5 ] comment=Holl
/interface list
add name=WAN
add name=LAN
/interface wifi channel
add band=5ghz-ax disabled=no frequency=\
5180,5320,5240,5725,5850,5955,6115,6295,6575,6815,7015,7100,7155,7195 \
name=channel1_5 skip-dfs-channels=all width=20/40/80mhz
add band=2ghz-n disabled=no frequency=2412,2437,2452,2472 name=channel2_2.4 \
skip-dfs-channels=all width=20mhz
/interface wifi configuration
add channel=channel2_2.4 country=Russia disabled=no mode=ap name=cfg2_2.4 \
security.ft=yes ssid=MikroTik_2.4 tx-power=15
/interface wifi datapath
add bridge=bridge1 disabled=no name=datapath1
/interface wifi configuration
add country=Russia datapath=datapath1 datapath.bridge=bridge1 disabled=no \
mode=ap name=cfg1_5 security.ft=yes ssid=MikroTik_5 tx-power=15
/interface wifi security
add authentication-types=wpa2-psk,wpa3-psk disable-pmkid=no disabled=no \
encryption="" ft=yes group-encryption=ccmp group-key-update=30m \
management-protection=allowed name=sec1_5
add authentication-types=wpa-psk,wpa2-psk disable-pmkid=no disabled=no \
encryption="" ft=no group-encryption=ccmp group-key-update=30m \
management-protection=allowed name=sec2_2
/interface wifi
add channel=channel1_5 configuration=cfg1_5 configuration.mode=ap .tx-power=\
15 datapath=datapath1 disabled=no name=cap-wifi1_5 radio-mac=\
48:A9:8A:C5:3B:7A security=sec1_5 security.ft=yes
add channel=channel2_2.4 configuration=cfg2_2.4 configuration.mode=ap \
datapath=datapath1 disabled=no name=cap-wifi2_2.4 radio-mac=\
48:A9:8A:C5:3B:7B security=sec2_2 security.ft=yes
set [ find default-name=wifi1 ] channel=channel1_5 configuration=cfg1_5 \
configuration.mode=ap datapath=datapath1 disabled=no name=wifi1_5 \
security=sec1_5 security.ft=yes
set [ find default-name=wifi2 ] channel=channel2_2.4 configuration=cfg2_2.4 \
configuration.mode=ap datapath=datapath1 disabled=no name=wifi2_2.4 \
security=sec2_2 security.ft=yes
/ip kid-control
add fri=0s-1d mon=0s-1d name=system-dummy sat=0s-1d sun=0s-1d thu=0s-1d tue=\
0s-1d tur-fri=0s-1d tur-mon=0s-1d tur-sat=0s-1d tur-sun=0s-1d tur-thu=\
0s-1d tur-tue=0s-1d tur-wed=0s-1d wed=0s-1d
/ip pool
add name=dhcp_pool1 ranges=192.168.1.2-192.168.1.35
/ip dhcp-server
add add-arp=yes address-pool=dhcp_pool1 interface=bridge1 lease-time=1h name=\
dhcp1
/ip smb users
set [ find default=yes ] disabled=yes
/system logging action
add disk-file-name=usb1/log disk-lines-per-file=2000 name=usb1 target=disk
/interface bridge port
add bridge=bridge1 interface=ether1
add bridge=bridge1 interface=ether3
add bridge=bridge1 interface=ether4
add bridge=bridge1 interface=ether5
add bridge=bridge1 interface=wifi1_5
add bridge=bridge1 interface=wifi2_2.4
/ip firewall connection tracking
set tcp-established-timeout=15m
/interface detect-internet
set detect-interface-list=all
/interface list member
add interface=ether2 list=WAN
add interface=bridge1 list=LAN
/interface wifi access-list
add action=accept comment="Honor Magic4 Pro " disabled=no interface=any \
mac-address=68:A7:B4:18:F8:1C
add action=accept comment="OnePlus 10 Pro" disabled=no interface=any \
mac-address=48:74:12:BF:18:87
add action=accept comment="Yandex Station 1" disabled=no interface=\
cap-wifi2_2.4 mac-address=B8:87:6E:83:41:00
add action=accept comment="Polaris PWK 1725CGLD" disabled=no interface=\
wifi2_2.4 mac-address=82:64:6F:A9:2D:8F
add action=accept comment="Lamp 2" disabled=no interface=cap-wifi2_2.4 \
mac-address=A0:92:08:37:3A:39
add action=accept comment="Grundig TV" disabled=no interface=wifi1_5 \
mac-address=BC:6B:FF:D8:74:E3
add action=accept comment="Lamp 1" disabled=no interface=cap-wifi2_2.4 \
mac-address=A0:92:08:37:8E:55
add action=accept comment="HONOR Choice Robot Cleaner R2+" disabled=no \
interface=any mac-address=20:67:E0:76:A8:9C
add action=accept comment="Rozetka Smart Life" disabled=no interface=\
cap-wifi2_2.4 mac-address=C4:82:E1:2C:93:AC
add action=accept comment="Huawei mate 20X" disabled=no interface=any \
mac-address=48:3F:E9:66:62:EB
add action=accept comment="Yandex Station 2" disabled=no interface=wifi2_2.4 \
mac-address=3C:0B:4F:E6:A7:B4
add action=accept comment="Xiaomi Mi Box S Gen 2" disabled=no interface=\
cap-wifi1_5 mac-address=4C:31:2D:ED:85:FB
add action=accept comment="OnePlus Nord CE 2 Lite 5G" disabled=no interface=\
any mac-address=48:74:12:E6:27:5D
add action=accept comment="Realme C25S" disabled=no interface=any \
mac-address=E4:B5:03:2F:A9:EF
add action=reject comment="Blocking access to the WIFI network" disabled=no \
interface=any
/interface wifi capsman
set ca-certificate=auto certificate=auto enabled=yes package-path="" \
require-peer-certificate=no upgrade-policy=require-same-version
/interface wifi provisioning
add action=create-enabled disabled=no master-configuration=cfg2_2.4 \
name-format=cAP_2_2.4 radio-mac=00:00:00:00:00:00 supported-bands=2ghz-n
add action=create-enabled disabled=no master-configuration=cfg1_5 \
name-format=cAP_1_5 radio-mac=00:00:00:00:00:00 supported-bands=5ghz-ax
/ip address
add address=192.168.1.1/24 interface=bridge1 network=192.168.1.0
/ip cloud
set ddns-enabled=yes ddns-update-interval=30m
/ip cloud advanced
set use-local-address=yes
/ip dhcp-client
add interface=ether2
/ip dhcp-server lease
add address=192.168.1.8 client-id=1:c4:57:6e:75:3:c6 comment="Samsung TV" \
mac-address=C4:57:6E:75:03:C6 server=dhcp1
add address=192.168.1.4 client-id=1:50:e5:49:85:7e:16 comment=\
"Comp Zhenyulka " mac-address=50:E5:49:85:7E:16 server=dhcp1
add address=192.168.1.10 client-id=1:3c:83:75:e3:d4:98 comment=\
"Nokia 435 DS " mac-address=3C:83:75:E3:D4:98 server=dhcp1
add address=192.168.1.12 client-id=1:48:5d:60:66:34:c6 comment="MSI notebook" \
mac-address=48:5D:60:66:34:C6 server=dhcp1
add address=192.168.1.7 client-id=1:7c:a1:77:75:fc:2c comment=\
"Huawei Mate 10" mac-address=7C:A1:77:75:FC:2C server=dhcp1
add address=192.168.1.16 client-id=1:0:11:32:1a:28:cb comment=\
"Synology DS 212J" mac-address=00:11:32:1A:28:CB server=dhcp1
add address=192.168.1.18 client-id=1:b4:52:7d:68:d0:1b comment=\
"Sony Xperia Z" mac-address=B4:52:7D:68:D0:1B server=dhcp1
add address=192.168.1.19 client-id=1:40:61:86:bb:db:38 comment=\
"MSI \ED\EE\F3\F2 (LAN)" mac-address=40:61:86:BB:DB:38 server=dhcp1
add address=192.168.1.20 client-id=1:e0:24:81:45:49:68 comment="Honor 9X" \
mac-address=E0:24:81:45:49:68 server=dhcp1
add address=192.168.1.21 client-id=1:48:3f:e9:66:62:eb comment=\
"Huawei mate 20X" mac-address=48:3F:E9:66:62:EB server=dhcp1
add address=192.168.1.11 client-id=1:f8:1a:67:b6:1a:c8 comment="TP-Link WIFI" \
mac-address=F8:1A:67:B6:1A:C8 server=dhcp1
add address=192.168.1.3 client-id=1:f0:2f:74:cb:72:52 comment="My comp" \
mac-address=F0:2F:74:CB:72:52 server=dhcp1
add address=192.168.1.14 client-id=1:d4:8a:3b:5:a1:59 comment=\
"Xiaomi Mi Box S Gen 1" mac-address=D4:8A:3B:05:A1:59 server=dhcp1
add address=192.168.1.23 client-id=1:f8:e4:3b:c7:dd:b5 comment=\
"Xiaomi Mi Box S (USB-LAN Adapter)" mac-address=F8:E4:3B:C7:DD:B5 server=\
dhcp1
add address=192.168.1.26 comment=Lamp_2 mac-address=A0:92:08:37:3A:39 server=\
dhcp1
add address=192.168.1.25 comment=Lamp_1 mac-address=A0:92:08:37:8E:55 server=\
dhcp1
add address=192.168.1.17 client-id=1:e8:48:b8:f:96:f0 comment=\
"TP-Link Smart Swith" mac-address=E8:48:B8:0F:96:F0 server=dhcp1
add address=192.168.1.27 client-id=1:b2:4c:ca:8d:a2:33 comment=\
"Google Pixel 6 Pro" mac-address=B2:4C:CA:8D:A2:33 server=dhcp1
add address=192.168.1.5 client-id=1:68:a7:b4:18:f8:1c comment=\
"Honor magic 4 Pro" mac-address=68:A7:B4:18:F8:1C server=dhcp1
add address=192.168.1.24 client-id=\
ff:6e:83:41:0:0:1:0:1:c7:92:bc:88:b8:87:6e:83:41:0 comment=\
"Yandex Station 1" mac-address=B8:87:6E:83:41:00 server=dhcp1
add address=192.168.1.29 comment="Polaris PWK 1725CGLD" mac-address=\
82:64:6F:A9:2D:8F server=dhcp1
add address=192.168.1.9 comment="Rozetka Smart life" mac-address=\
C4:82:E1:2C:93:AC server=dhcp1
add address=192.168.1.13 client-id=1:48:74:12:bf:18:87 comment=\
OnePlus-10-Pro-5G mac-address=48:74:12:BF:18:87 server=dhcp1
add address=192.168.1.31 client-id=1:bc:6b:ff:d8:74:e3 comment="Grundig TV" \
mac-address=BC:6B:FF:D8:74:E3 server=dhcp1
add address=192.168.1.2 client-id=1:48:a9:8a:c5:3b:78 comment=\
"Mikrotik cAP ax" mac-address=48:A9:8A:C5:3B:78 server=dhcp1 use-src-mac=\
yes
add address=192.168.1.28 comment="HONOR Choice Robot Cleaner R2 Plus " \
mac-address=20:67:E0:76:A8:9C server=dhcp1
add address=192.168.1.6 client-id=\
ff:4f:e6:a7:b4:0:1:0:1:c7:92:bc:86:3c:b:5f:e6:a7:b4 comment=\
"Yandex Station 2" mac-address=3C:0B:4F:E6:A7:B4 server=dhcp1
add address=192.168.1.30 client-id=1:4c:31:2d:ed:85:fb comment=\
"Xiaomi Mi Box S Gen 2" mac-address=4C:31:2D:ED:85:FB server=dhcp1
add address=192.168.1.22 client-id=1:e4:b5:3:2f:a9:ef comment="Realme C25S" \
mac-address=E4:B5:03:2F:A9:EF server=dhcp1
add address=192.168.1.15 client-id=1:48:74:12:e6:27:5d comment=\
"OnePlus Nord CE 2 Lite 5G" mac-address=48:74:12:E6:27:5D server=dhcp1
/ip dhcp-server network
add address=192.168.1.0/24 gateway=192.168.1.1
/ip dns
set allow-remote-requests=yes cache-max-ttl=1d
/ip firewall address-list
add list=ftp_blacklist
add address=109.195.96.1 list=DNSServers
add address=5.3.3.3 list=DNSServers
/ip firewall filter
add action=fasttrack-connection chain=forward comment="FastTrack Connection" \
connection-state=established,related hw-offload=yes
add action=fasttrack-connection chain=forward hw-offload=yes in-interface=\
bridge1 out-interface=ether2
add action=accept chain=input comment="Allow IGMP" in-interface=ether2 \
protocol=igmp
add action=accept chain=forward comment="IPTV UDP forwarding" dst-port=1234 \
protocol=udp
add action=drop chain=input comment="Drop hackers" in-interface-list=WAN \
src-address-list=BlackLis
add action=drop chain=input dst-port=53 in-interface=ether2 protocol=udp \
src-address-list="dns spoofing"
add action=drop chain=input comment="drop ftp brute forcers" dst-port=\
21,55536-55537 protocol=tcp src-address-list=ftp_blacklist
add action=drop chain=input src-address-list="Scanner Port"
add action=accept chain=input protocol=icmp
add action=accept chain=input connection-state=established
add action=accept chain=input connection-state=related
add action=accept chain=input comment="Dostup snarugy" dst-port=8291 \
protocol=tcp
add action=accept chain=input comment="allow IPsec NAT" dst-port=4500 \
protocol=udp
add action=accept chain=input comment="allow IKE" dst-port=500 protocol=udp
add action=accept chain=input comment="allow l2tp" dst-port=1701 protocol=udp
add action=accept chain=input comment="allow pptp" dst-port=1723 protocol=tcp
add action=accept chain=input comment="allow sstp" dst-port=443 protocol=tcp
add action=accept chain=input connection-state=established,related
add action=accept chain=forward connection-state=established,related
add action=accept chain=input in-interface=ether2 limit=50/5s,2:packet \
protocol=icmp
add action=accept chain=forward dst-port=80 in-interface=ether2 protocol=tcp
add action=accept chain=output content="530 Login incorrect" dst-limit=\
1/1m,9,dst-address/1m protocol=tcp
add action=drop chain=forward connection-state=established,related \
in-interface=ether2 out-interface=bridge1
add action=drop chain=forward connection-state=invalid
add action=drop chain=input connection-state=invalid
add action=drop chain=forward connection-state=invalid
add action=add-dst-to-address-list address-list=ftp_blacklist \
address-list-timeout=4w2d chain=output content="530 Login incorrect" \
protocol=tcp
add action=add-src-to-address-list address-list="dns spoofing" \
address-list-timeout=2h chain=input dst-port=53 in-interface=ether2 \
protocol=udp
add action=add-src-to-address-list address-list=BlackList chain=input \
comment="DDoS DNS" in-interface-list=WAN protocol=udp src-address-list=\
!DNSServers src-port=53
add action=add-src-to-address-list address-list=BlackList chain=input \
comment="Drop external DNS connections" dst-port=53 in-interface-list=WAN \
protocol=udp
add action=add-src-to-address-list address-list=BlackList chain=input \
comment="Drop external DNS connections" dst-port=53 in-interface-list=WAN \
protocol=tcp
add action=accept chain=input comment=NTP-Allow dst-port=123 protocol=udp
/ip firewall nat
add action=masquerade chain=srcnat out-interface=ether2
add action=dst-nat chain=dstnat dst-port=55536-55537 in-interface=ether2 log=\
yes protocol=tcp to-addresses=192.168.1.16 to-ports=55536-55537
add action=dst-nat chain=dstnat dst-port=212 in-interface=ether2 log=yes \
protocol=tcp to-addresses=192.168.1.16 to-ports=212
/ip service
set telnet disabled=yes
set ftp disabled=yes
set www disabled=yes
set ssh disabled=yes
set api disabled=yes
set api-ssl disabled=yes
/ip smb shares
set [ find default=yes ] directory=/pub
/ipv6 dhcp-client
add interface=ether2 pool-name=ipv6-pool request=address,prefix
/system clock
set time-zone-name=Asia/Astana
/system identity
set name="MikroTik hAP AX^3"
/system logging
set 0 action=usb1
set 1 action=usb1
set 2 action=usb1
set 3 action=usb1
/system note
set show-at-login=no
/system ntp client
set enabled=yes
/system ntp server
set enabled=yes manycast=yes multicast=yes
/system ntp client servers
add address=ntp0.ntp-servers.net
add address=ntp2.ntp-servers.net
add address=ntp6.ntp-servers.net
/system routerboard settings
set auto-upgrade=yes
/tool romon
set enabled=yes
Last edited by holvoetn on Fri Mar 29, 2024 3:46 pm, edited 1 time in total.
Reason: added code quotes for readability
Reason: added code quotes for readability
Re: hAP ax3 temperature at 58-60 degrees...
How big does that dynamic address list get after 1 day, 2 days, 3 days ?
If it only keeps growing, you can hit a memory limit ...
If it only keeps growing, you can hit a memory limit ...
Re: hAP ax3 temperature at 58-60 degrees...
In 6 hours after the reboot, the memory decreased by 400MB.
Are we talking about /firewall address lists? if so, how do I limit its size?
Are we talking about /firewall address lists? if so, how do I limit its size?
You do not have the required permissions to view the files attached to this post.
Re: hAP ax3 temperature at 58-60 degrees...
How to limit the address list ?
Don't use it ... simple, no ?
The way I see it (provided unlimited memory space), you are going to end up with every address on the internet if you never clean up that address list.
Why do you want to list those trying to get in ?
Simply drop them in raw rule (MUCH faster) and done.
What's the use of listing those IPs ?
What else are you going to do with it ?
Besides, processing that list on itself also takes away resources from your device.
Like memory ... but also CPU.
Turn it around.
ONLY allow what should be allowed. DROP ALL ELSE.
(hmmm ... sounds like a solid firewall concept too
)
Don't use it ... simple, no ?
The way I see it (provided unlimited memory space), you are going to end up with every address on the internet if you never clean up that address list.
Why do you want to list those trying to get in ?
Simply drop them in raw rule (MUCH faster) and done.
What's the use of listing those IPs ?
What else are you going to do with it ?
Besides, processing that list on itself also takes away resources from your device.
Like memory ... but also CPU.
Turn it around.
ONLY allow what should be allowed. DROP ALL ELSE.
(hmmm ... sounds like a solid firewall concept too
)Re: hAP ax3 temperature at 58-60 degrees...
It's a good idea, I don't know how to implement it yet, but I understood the direction-not to filter and block everything in a row, but to accept only what is necessary, and cut off the rest.
Re: hAP ax3 temperature at 58-60 degrees...
Default firewall fiter rule set folliws the "allow needed, drop the rest" concept, although the last rule in chain=forward is formulated in a bit cryptical way. Too bad that some people eradicate the default firewall setup only to replace it with a pile of garbage. Instead of adjusting default if needed.
Re: hAP ax3 temperature at 58-60 degrees...
And then blame CPU temperature when things go haywire ... 
Re: hAP ax3 temperature at 58-60 degrees...
And then saying: 60 degrees is normal.
Who is online
Users browsing this forum: No registered users and 9 guests