Code: Select all
ipv6/route/print
Flags: D - dynamic; X - disabled, I - inactive, A - active;
c - connect, s - static, r - rip, b - bgp, o - ospf, d - dhcp, v - vpn, m - modem, g - slaac, y - bgp-mpls-vpn; H - hw-offloaded; + - ecmp
# DST-ADDRESS GATEWAY DISTANCE
DIb ::/0 2xxxxxxxxxxx::1 20
DIb 2001:200::/32 2xxxxxxxxxxx::1 20
DIb 2001:200:900::/40 2xxxxxxxxxxc::1 20
Code: Select all
ping 2800:3f0:4002:801::200e src-address=2xxxxxx::1xxx
SEQ HOST SIZE TTL TIME STATUS
0 no route to host
1 no route to host
2 no route to host Note: If I add another ::/0 (to the same gw) it works... so... how? why?!
Thanks!
