Hi peoples,
So since my ISP requires now VLAN tagging (ID 10), I want to configure the switch RB260GS (which will sit behind the ISP modem and before the firewalls). The goal is, that on the wan port (port1) it accepts traffic with vlan ID 10 and adds the tag for egress. Port 2&3 (firewalls) should untag the traffic.
My test setup is a laptop configured with vlan id 10 connected to wan port and another laptop connected to port2.
With my current configuration, I can ping the untagged laptop with my tagged laptop, but not the other way around.
What do I need to change, so both laptops see each other?