Follow us on...
Follow us on G+ Follow us on Twitter Follow us on Facebook Watch us on YouTube
Register
Page 1 of 2 12 LastLast
Results 1 to 15 of 21
  1. #1
    Status
    Offline
    dr0m4n's Avatar
    Newbie
    Join Date
    Nov 2009
    Posts
    31
    Reviews
    Read 0 Reviews
    Downloads
    0
    Uploads
    0
    Feedback Score
    0

    Seting IP Public pada host di bawah ruter LAN

    permisi agan-agan fmi.. Click here to enlarge
    Sesuai judul di atas, saya mau coba share sedikit hasil setingan mengenai cara mendistribusikan ip public di host client yang berada di bawah ruter..

    Semoga tidak repost..

    Berikut gambarannya:
    Click here to enlarge


    DI RUTER A
    1. Buat Interface EoIP, beri nama eoip-buroq-1
    add arp=enabled comment="" disabled=no l2mtu=65535 mac-address=00:00:5E:80:00:01 mtu=1500 name=eoip-buroq-1 \
    remote-address=10.20.30.1 tunnel-id=99
    2. Buat Bridge, dengan port : eth_ISP & eoip-buroq-1
    add admin-mac=00:00:00:00:00:00 ageing-time=5m arp=enabled auto-mac=yes comment="" disabled=no forward-delay=\
    15s l2mtu=1524 max-message-age=20s mtu=1500 name=bridge-buroq-1 priority=0x8000 protocol-mode=none \
    transmit-hold-count=6
    seting bridgenya supaya pake ip firewall:
    set use-ip-firewall=yes use-ip-firewall-for-pppoe=no use-ip-firewall-for-vlan=no
    seting port nya:
    add bridge=bridge-buroq-1 comment="" disabled=no edge=auto external-fdb=auto horizon=none interface=\
    eoip-buroq-1 path-cost=10 point-to-point=auto priority=0x80

    add bridge=bridge-buroq-1 comment="" disabled=no edge=auto external-fdb=auto horizon=none interface=eth_ISP \
    path-cost=10 point-to-point=auto priority=0x80
    DI RUTER B
    1. Buat interface EoIP, beri nama eoip-buroq-2
    add arp=enabled comment="" disabled=no l2mtu=65535 mac-address=00:00:5E:80:00:02 mtu=1500 name=eoip-buroq-2 remote-address=10.20.30.30 \
    tunnel-id=99
    2. Buat Bridge, dengan port : eth_LAN2 & eoip-buroq-2
    add admin-mac=00:00:00:00:00:00 ageing-time=5m arp=enabled auto-mac=yes comment="" disabled=no forward-delay=15s l2mtu=1524 \
    max-message-age=20s mtu=1500 name=bridge-buroq-2 priority=0x8000 protocol-mode=none transmit-hold-count=6
    seting bridgenya supaya pake ip firewall:
    set use-ip-firewall=yes use-ip-firewall-for-pppoe=no use-ip-firewall-for-vlan=no
    seting portnya:
    add bridge=bridge-buroq-2 comment="" disabled=no edge=auto external-fdb=auto horizon=none interface=eoip-buroq-2 path-cost=10 \
    point-to-point=auto priority=0x80
    add bridge=bridge-buroq-2 comment="" disabled=no edge=auto external-fdb=auto horizon=none interface=lan_LAN2 path-cost=10 point-to-point=auto \
    priority=0x80
    DI HOST A
    1. Setting ip address publiknya..
    2. TES trace dari host A ke gateway, kalo sudah 1 hop berarti BERHASIL.

    notes:
    - Tunnel Id pada interface EoIP di ruter A harus sama dengan Tunnel ID pada EoIP di ruter B
    - Kita bisa memberikan mac address yang sudah di sediakan IANA utk kasus ini, yaitu antara 00-00-5E-80-00-00 sampe 00-00-5E-FF-FF-FF


    dengan setingan ini, batasan bandwidth bisa di ruter A atau di ruter B

    sekian sharing nya.. mohon petunjuk jika ada kesalahan.. Click here to enlarge
    Thx

  2. The Following 7 Users Say Thank You to dr0m4n For This Useful Post:


  3. #2
    Status
    Offline
    unique_leader's Avatar
    Member Super Senior
    Join Date
    Jul 2007
    Posts
    637
    Reviews
    Read 0 Reviews
    Downloads
    5
    Uploads
    0
    Feedback Score
    1 (100%)
    nice post gan







    ternyata pertamaxClick here to enlarge

  4. #3
    Status
    Offline
    ipoelnet's Avatar
    Member
    Join Date
    Sep 2009
    Location
    Ngalah
    Posts
    216
    Reviews
    Read 0 Reviews
    Downloads
    0
    Uploads
    0
    Feedback Score
    0
    Wuih... mantep nich gan....

    kira" keuntungannya kalau kita pake itu apa ya gan... ?

    Click here to enlarge

  5. #4
    Status
    Offline
    dr0m4n's Avatar
    Newbie
    Join Date