Dari kemarin ubek-ubek di Internet, cari sana sini, tanya sama temen2 di YM (malah diomelin ), lalu di wiki.mikrotik dan lain sebagainya akhirnya ketemu juga dan sudah Akang coba it's fuly works!!!


Emang ilmu mahal harganya, dan tidak ada salahnya membagi harga mahal tersebut di Internet menjadi lebih murah dan terjangkau


Setting PPPoE Client
>_

/interface pppoe-client
add ac-name="" add-default-route=no allow=pap,chap,mschap1,mschap2 comment="" \
dial-on-demand=no disabled=no interface=Speedy-1 max-mru=1480 max-mtu=1480 \
mrru=disabled name="******@telkom.net" password="***" profile=default \
service-name="" use-peer-dns=no user="***"


add ac-name="" add-default-route=no allow=pap,chap,mschap1,mschap2 comment="" \
dial-on-demand=no disabled=no interface=Speedy-2 max-mru=1480 max-mtu=1480 \
mrru=disabled name="******@telkom.net" password="***" profile=default \
service-name="" use-peer-dns=no user="***"


add ac-name="" add-default-route=no allow=pap,chap,mschap1,mschap2 comment="" \
dial-on-demand=no disabled=no interface=Speedy-3 max-mru=1480 max-mtu=1480 \
mrru=disabled name="******@telkom.net" password="***" profile=default \
service-name="" use-peer-dns=no user="***"


add ac-name="" add-default-route=no allow=pap,chap,mschap1,mschap2 comment="" \
dial-on-demand=no disabled=no interface=Speedy-4 max-mru=1480 max-mtu=1480 \
mrru=disabled name="******@telkom.net" password="***" profile=default \
service-name="" use-peer-dns=no user="***"


add ac-name="" add-default-route=no allow=pap,chap,mschap1,mschap2 comment="" \
dial-on-demand=no disabled=no interface=Speedy-5 max-mru=1480 max-mtu=1480 \
mrru=disabled name="******@telkom.net" password="***" profile=default \
service-name="" use-peer-dns=no user="***"



Setting Mangle u/ LB
>_

/ip firewall mangle
add chain=prerouting action=mark-connection new-connection-mark=ADSL-1 \
passthrough=yes connection-state=new in-interface=HotSpot nth=*** \
comment="" disabled=no
add chain=prerouting action=mark-routing new-routing-mark=ADSL-1 passthrough=no \
in-interface=HotSpot connection-mark=ADSL-1 comment="" disabled=no
add chain=prerouting action=mark-connection new-connection-mark=ADSL-2 \
passthrough=yes connection-state=new in-interface=HotSpot nth=*** \
comment="" disabled=no
add chain=prerouting action=mark-routing new-routing-mark=ADSL-2 passthrough=no \
in-interface=HotSpot connection-mark=ADSL-2 comment="" disabled=no
add chain=prerouting action=mark-connection new-connection-mark=ADSL-3 \
passthrough=yes connection-state=new in-interface=HotSpot nth=*** \
comment="" disabled=no
add chain=prerouting action=mark-routing new-routing-mark=ADSL-3 passthrough=no \
in-interface=HotSpot connection-mark=ADSL-3 comment="" disabled=no
add chain=prerouting action=mark-connection new-connection-mark=ADSL-4 \
passthrough=yes connection-state=new in-interface=HotSpot nth=*** \
comment="" disabled=no
add chain=prerouting action=mark-routing new-routing-mark=ADSL-4 passthrough=no \
in-interface=HotSpot connection-mark=ADSL-4 comment="" disabled=no
add chain=prerouting action=mark-connection new-connection-mark=ADSL-5 \
passthrough=yes connection-state=new in-interface=HotSpot nth=*** \
comment="" disabled=no
add chain=prerouting action=mark-routing new-routing-mark=ADSL-5 passthrough=no \
in-interface=HotSpot connection-mark=ADSL-5 comment="" disabled=no
Tanda Bintang
NTH untuk MT Versi 3.XX ada 2 versi, silahkan dipilih, mana aja pasti jadi


Versi 1
Informasi

NTH : 5.1; 5.2; 5.3; 5.4; 5.5
Untuk settingan yang "mark-routing" gunakan "passthrough" yes
Click here to enlarge
Versi 2
Informasi

NTH : 5.1; 4.1; 3.1; 2.1; 0.0 atau 1.1
Untuk settingan yang "mark-routing" gunakan "passthrough" no
Click here to enlarge
Konfigurasi NAT
-- Ada 2 Versi, silahkan di pilih mana saja bisa --


Versi 1
>_

/ip firewall nat
add chain=srcnat action=src-nat to-addresses=[IP-Speedy-1] to-ports=0-65535 \
connection-mark=ADSL-1 comment="" disabled=no
add chain=srcnat action=src-nat to-addresses=[IP-Speedy-2] to-ports=0-65535 \
connection-mark=ADSL-2 comment="" disabled=no
add chain=srcnat action=src-nat to-addresses=[IP-Speedy-3] to-ports=0-65535 \
connection-mark=ADSL-3 comment="" disabled=no
add chain=srcnat action=src-nat to-addresses=[IP-Speedy-4] to-ports=0-65535 \
connection-mark=ADSL-4 comment="" disabled=no
add chain=srcnat action=src-nat to-addresses=[IP-Speedy-5] to-ports=0-65535 \
connection-mark=ADSL-5 comment="" disabled=no
Versi 2
>_

/ip firewall nat
add chain=srcnat action=masquerade src-address="Lokal"
Konfigurasi Route
>_

/ip route
add disabled=no distance=1 dst-address=0.0.0.0/0 gateway=PPPoE-1 \
routing-mark=ADSL-1
add disabled=no distance=1 dst-address=0.0.0.0/0 gateway=PPPoE-2 \
routing-mark=ADSL-2
add disabled=no distance=1 dst-address=0.0.0.0/0 gateway=PPPoE-3 \
routing-mark=ADSL-3
add disabled=no distance=1 dst-address=0.0.0.0/0 gateway=PPPoE-4 \
routing-mark=ADSL-4
add disabled=no distance=1 dst-address=0.0.0.0/0 gateway=PPPoE-5 \
routing-mark=ADSL-5
add disabled=no distance=1 dst-address=0.0.0.0/0 gateway=PPPoE-1, \
PPPoE-2,PPPoE-3,PPPoE-4,PPPoE-5
Keterangan Warna biru --UPDATE--
Setelah Akang amati belakangan ini terdapat perubahan pola counter speedy pada MikroTik, jika menggunakan 1 Gateway untuk default gateway, maka akan ada salah 1 line yang drop entah di menit ke-5 atau menit ke-10 padahal dulu tidak begini... nah biar lebih stabil lagi, Akang udah trial eror dan pantau belakangan ini, untuk default gateway masukan semua gateway PPPoE Speedy/ISP agar semua paket dapat tersebar secara merata.
Akhirnya final juga Untuk Settingan PPPoE di MikroTik + LoadBalance, Selamat Mencoba


::: Tambahan :::
Bagi yang merasa kesulitan atau eror saat akses Internet Banking menggunakan Load Balance bisa menambahkan rule berikut ini, dan kalau posisi-nya Akang rule ini ditaruh di bawah rule Load Balance.
Code: