WiKi | An Docs Help Support:Setting PPPoE 5 Speedy

Akangage

Dari kemarin ubek-ubek di Internet, cari sana sini, tanya sama temen2 di YM (malah diomelin ), lalu di wiki.mikrotik dan lain sebagainya akhirnya ketemu juga dan sudah Akang coba it's fuly works!!!

Emang ilmu mahal harganya, dan tidak ada salahnya membagi harga mahal tersebut di Internet menjadi lebih murah dan terjangkau

Setting PPPoE Client

>_

/interface pppoe-client
add ac-name="" add-default-route=no allow=pap,chap,mschap1,mschap2 comment="" \
dial-on-demand=no disabled=no interface=Speedy-1 max-mru=1480 max-mtu=1480 \
mrru=disabled name="******@telkom.net" password="***" profile=default \
service-name="" use-peer-dns=no user="***"

add ac-name="" add-default-route=no allow=pap,chap,mschap1,mschap2 comment="" \
dial-on-demand=no disabled=no interface=Speedy-2 max-mru=1480 max-mtu=1480 \
mrru=disabled name="******@telkom.net" password="***" profile=default \
service-name="" use-peer-dns=no user="***"

add ac-name="" add-default-route=no allow=pap,chap,mschap1,mschap2 comment="" \
dial-on-demand=no disabled=no interface=Speedy-3 max-mru=1480 max-mtu=1480 \
mrru=disabled name="******@telkom.net" password="***" profile=default \
service-name="" use-peer-dns=no user="***"

add ac-name="" add-default-route=no allow=pap,chap,mschap1,mschap2 comment="" \
dial-on-demand=no disabled=no interface=Speedy-4 max-mru=1480 max-mtu=1480 \
mrru=disabled name="******@telkom.net" password="***" profile=default \
service-name="" use-peer-dns=no user="***"

add ac-name="" add-default-route=no allow=pap,chap,mschap1,mschap2 comment="" \
dial-on-demand=no disabled=no interface=Speedy-5 max-mru=1480 max-mtu=1480 \
mrru=disabled name="******@telkom.net" password="***" profile=default \
service-name="" use-peer-dns=no user="***"

Setting Mangle u/ LB

>_

/ip firewall mangle
add chain=prerouting action=mark-connection new-connection-mark=ADSL-1 \
passthrough=yes connection-state=new in-interface=HotSpot nth=*** \
comment="" disabled=no
add chain=prerouting action=mark-routing new-routing-mark=ADSL-1 passthrough=no \
in-interface=HotSpot connection-mark=ADSL-1 comment="" disabled=no
add chain=prerouting action=mark-connection new-connection-mark=ADSL-2 \
passthrough=yes connection-state=new in-interface=HotSpot nth=*** \
comment="" disabled=no
add chain=prerouting action=mark-routing new-routing-mark=ADSL-2 passthrough=no \
in-interface=HotSpot connection-mark=ADSL-2 comment="" disabled=no
add chain=prerouting action=mark-connection new-connection-mark=ADSL-3 \
passthrough=yes connection-state=new in-interface=HotSpot nth=*** \
comment="" disabled=no
add chain=prerouting action=mark-routing new-routing-mark=ADSL-3 passthrough=no \
in-interface=HotSpot connection-mark=ADSL-3 comment="" disabled=no
add chain=prerouting action=mark-connection new-connection-mark=ADSL-4 \
passthrough=yes connection-state=new in-interface=HotSpot nth=*** \
comment="" disabled=no
add chain=prerouting action=mark-routing new-routing-mark=ADSL-4 passthrough=no \
in-interface=HotSpot connection-mark=ADSL-4 comment="" disabled=no
add chain=prerouting action=mark-connection new-connection-mark=ADSL-5 \
passthrough=yes connection-state=new in-interface=HotSpot nth=*** \
comment="" disabled=no
add chain=prerouting action=mark-routing new-routing-mark=ADSL-5 passthrough=no \
in-interface=HotSpot connection-mark=ADSL-5 comment="" disabled=no

Tanda Bintang
NTH untuk MT Versi 3.XX ada 2 versi, silahkan dipilih, mana aja pasti jadi

Versi 1

Informasi

NTH : 5.1; 5.2; 5.3; 5.4; 5.5
Untuk settingan yang "mark-routing" gunakan "passthrough" yes

Versi 2

Informasi

NTH : 5.1; 4.1; 3.1; 2.1; 0.0 atau 1.1
Untuk settingan yang "mark-routing" gunakan "passthrough" no

Konfigurasi NAT
-- Ada 2 Versi, silahkan di pilih mana saja bisa --

Versi 1

>_

/ip firewall nat
add chain=srcnat action=src-nat to-addresses=[IP-Speedy-1] to-ports=0-65535 \
connection-mark=ADSL-1 comment="" disabled=no
add chain=srcnat action=src-nat to-addresses=[IP-Speedy-2] to-ports=0-65535 \
connection-mark=ADSL-2 comment="" disabled=no
add chain=srcnat action=src-nat to-addresses=[IP-Speedy-3] to-ports=0-65535 \
connection-mark=ADSL-3 comment="" disabled=no
add chain=srcnat action=src-nat to-addresses=[IP-Speedy-4] to-ports=0-65535 \
connection-mark=ADSL-4 comment="" disabled=no
add chain=srcnat action=src-nat to-addresses=[IP-Speedy-5] to-ports=0-65535 \
connection-mark=ADSL-5 comment="" disabled=no

Versi 2

>_

/ip firewall nat
add chain=srcnat action=masquerade src-address="Lokal"

Konfigurasi Route

>_

/ip route
add disabled=no distance=1 dst-address=0.0.0.0/0 gateway=PPPoE-1 \
routing-mark=ADSL-1
add disabled=no distance=1 dst-address=0.0.0.0/0 gateway=PPPoE-2 \
routing-mark=ADSL-2
add disabled=no distance=1 dst-address=0.0.0.0/0 gateway=PPPoE-3 \
routing-mark=ADSL-3
add disabled=no distance=1 dst-address=0.0.0.0/0 gateway=PPPoE-4 \
routing-mark=ADSL-4
add disabled=no distance=1 dst-address=0.0.0.0/0 gateway=PPPoE-5 \
routing-mark=ADSL-5
add disabled=no distance=1 dst-address=0.0.0.0/0 gateway=PPPoE-1, \
PPPoE-2,PPPoE-3,PPPoE-4,PPPoE-5

Keterangan Warna biru --UPDATE--

Setelah Akang amati belakangan ini terdapat perubahan pola counter speedy pada MikroTik, jika menggunakan 1 Gateway untuk default gateway, maka akan ada salah 1 line yang drop entah di menit ke-5 atau menit ke-10 padahal dulu tidak begini... nah biar lebih stabil lagi, Akang udah trial eror dan pantau belakangan ini, untuk default gateway masukan semua gateway PPPoE Speedy/ISP agar semua paket dapat tersebar secara merata.

Akhirnya final juga Untuk Settingan PPPoE di MikroTik + LoadBalance, Selamat Mencoba

::: Tambahan :::
Bagi yang merasa kesulitan atau eror saat akses Internet Banking menggunakan Load Balance bisa menambahkan rule berikut ini, dan kalau posisi-nya Akang rule ini ditaruh di bawah rule Load Balance.

Code:

/ip firewall mangle add action=mark-connection chain=prerouting comment="https mark" \


    connection-state=new disabled=no dst-port=443 in-interface=lokal \


    new-connection-mark=https-bank passthrough=yes protocol=tcp src-address=\


    12.33.24.0/26


add action=mark-routing chain=prerouting comment="" connection-mark=\


    https-bank disabled=no in-interface=lokal new-routing-mark=https-route \


    passthrough=no


/ip route add gateway=** routing-mark=https-route

command : tanda * = pilih gateway yang anda inginkan dan JANGAN LUPA!! ganti alamat src-address dengan alamat IP lokal anda. Rule ini juga BERLAKU untuk Load Balance PCC

Gambar LoadBalance penyebaran PAKET Merata atau BALANCE

Thanks buat brother2 semua yang membantu memecahkan solusi LB agar lebih maximal dan mantab

Code:

Akangage [Tutorial]


LB + Internal Proxy + HotSpot


LB + Pisah IIX & Internasional


LB 2 ISP or More Based IP Address


PPPoE 5 Speedy + LB Full Version


Setting USB Modem di MikroTik


Bikin PoE Sendiri


Block Webpage Redirect


Memperkuat Sinyal 3G/HSDPA


L7 Filtering

---------------------------------------------------------------------------------------
Mari kita budayakan "Thanks" atas setiap jernih payah usaha seseorang agar lebih semangat
lagi dalam mencari ilmu yang baru...... jangan lupa klik "Thanks"
---------------------------------------------------------------------------------------

WiKi | An Docs Help Support:Setting PPPoE 5 Speedy

Page Information

Users Browsing this Page

Posting Permissions

Posting Permissions