Thread: RouterOS v4 Released

Originally Posted by [a]

kemaren si 750 dah gw upgrade, ga masalah sih...tapi tak turunin lagi ke 3.30..

Cari selamet ya Om [a]...

apakah untuk ptp harus pake ros versi 4 yah ke2-2 nya ?

soalnya baru aja sy upgrade ros ke versi 4.0 dari awalnya 3.30 dan berhasil (satu sisi ptp)
tapi malangnya link jadi putus putus gak bisa konek.
sy menggunakan pcbox di kedua sisi

karena ini link utama jadi sy downgrade dan koneksi lancar kembali



mungkin ada yg pernah coba ptp di versi 3.xx dan 4.xx ?

thanks kalo ada yg kasih pencerahan

baru aja upgrade rb433 ke v4.0

ane punya RB750 baru di apged ke 4.0, keliatannya sih amang2 saja ... biasanya kalo ada masalah kalo apgred berapa lama yah ??
mudah2an lancar, akan ane coba sampai 73 jam deh ....

Originally Posted by hakeem

Cari selamet ya Om [a]...

nope, lagi ngoprek userman lagi...dan baru baca klo userman untuk 4 masih blum stabil...itu sih yg gua baca di forum utama mikrotik...ga tau klo gw salah baca yah...

weleh sy baru aja upgrade ke ver 4.0(x86), hasilnya.... apes

setelah upgrade ada chit2, sbbmesti update key <72jam, else jadi trial)

The upgrade to new format key is free of charge, and can be done
automatically right now in Winbox.

Please click on "Update license Key" button in the System License menu to
get the new key (your Windows computer needs to be connected to Internet).

If you do not update the key, this RouterOS installation will expire in
71h48m, and will require a complete reinstall.

Please press "Enter" to continue!


[admin@MikroTik] /system license> pr
software-id: "0NOC-DFJD"
old-software-id: "YHSM-UMG"
expires-in: 2d23h47m43s

terpaksa di downgrade ke 3.30 lagee... ribet! lagian belum butuh 802.11n

upgrade v4.0 untuk x86, don't try it at home!

Lha itu soalnya masih pake soft-id key format lama. dari 3.30 di upgrade/update dulu, terus baru update ke versi 4.
saya pake x86 lancar koq.

Originally Posted by hao

weleh sy baru aja upgrade ke ver 4.0(x86), hasilnya.... apes

setelah upgrade ada chit2, sbbmesti update key <72jam, else jadi trial)

The upgrade to new format key is free of charge, and can be done
automatically right now in Winbox.

Please click on "Update license Key" button in the System License menu to
get the new key (your Windows computer needs to be connected to Internet).

If you do not update the key, this RouterOS installation will expire in
71h48m, and will require a complete reinstall.

Please press "Enter" to continue!


[admin@MikroTik] /system license> pr
software-id: "0NOC-DFJD"
old-software-id: "YHSM-UMG"
expires-in: 2d23h47m43s

terpaksa di downgrade ke 3.30 lagee... ribet! lagian belum butuh 802.11n

upgrade v4.0 untuk x86, don't try it at home!

klo di rb 450G gijimane ya om cara updatenya ?? terus settingan kita setting ulang??

hm... iya juga dari v3.30 di update key dulu ya... lantas baru upgrade ke v4.0

inpo v3.30 system license print, sbb:
software-id: "0NOC-DFJD" <<< lah ini kan dah jadi 8 digit SID
old-software-id: "YHSM-UMG"
upgradable-to: v4.x
nlevel: 6
features:

setelah di upgrade ke v4.0, system license print, sbb:
software-id: "0NOC-DFJD"
old-software-id: "YHSM-UMG"
expires-in: 2d23h47m43s <<< hasilnya jadi ke trial mode dlm waktu 72jam

capek deh...

Originally Posted by kdebugx86

Lha itu soalnya masih pake soft-id key format lama. dari 3.30 di upgrade/update dulu, terus baru update ke versi 4.
saya pake x86 lancar koq.

dom sy bisa upgrade ke versi 4.x kok setelah update licensi
admin@NOC] > system license print
software-id: "4APB-S8TK"
upgradable-to: v4.x
nlevel: 4
features: extra-channels


apa update licensinya untung2an yah
"bener kata bro XEON donk"

Originally Posted by KuLoNiKiSHiNTeN

Pantesan di Obral... RB750 nya... jebulnya.. OS na ndak bisa di upgrade

bet thul... bet thul... bet thul...

dah bisa tuk rb750 bro..................

What's new in 4.1:

*) fixed problem - RB750 (clocked at 300MHz) Ethernet did not work;
*) fixed problem - routes on some interfaces (like VLAN) were not activated;
*) ppp, gps, sms, serial terminal - allow use of different channels
on same port across multiple programs simultaneous
*) dhcp server - added support for dynamic address-list entries;
*) hotspot - added support for dynamic address-list entries;
*) hotspot - fixed redirect after login in case if client gets new IP address
(problem introduced in 3.28);

What's new in 4.0:

*) IT87XX hardware monitoring sensor support;
*) kvm allows to choose emulated nic model;
*) hotspot - fixed redirect after login in case if client gets new IP address
(problem introduced in 3.28);
*) hotspot - fixed redirect after login in case if client gets new IP address;
*) console - commands like 'monitor', 'torch' and others that periodically
refresh information sometimes failed to work when started from
the scheduler;
*) console - scheduled scripts no longer require 'test' policy to run;
*) console - fix issues with scripts that contain lines with trailing spaces;
*) console - add back compatibility with old scripts that use space instead
of '=' to separate argument name and value;
*) console - following fixes:
- accept item numbers when prompted by command to specify item;
- argument names without '=' were matched even when expecting unnamed
value; this broke code such as:
:foreach i in=1,2,3 do {}
here 'i' was matched as argument name "in";
- 'tab' key did not automatically append '=' after complete argument
names;

What's new in 4.0rc1:

*) console - removed support for Lua (will be reintroduced later);
*) incorporated all the bug fixes since v3.30;
*) port remote-access - added 'log-file' property. If value is a non-empty
string, then all data that is read from the port is appended to a file
with that name, regardless of the active remote connection;
*) console - removed '/user' from the output of top level '/export' command,
still can be exported by '/user export';

What's new in 4.0beta4:

*) routing - changed BGP network and default-originate behavior;
*) web proxy - allow to edit error page;
*) console - terminal window size change now does not trigger full terminal
reset;
*) mesh protocol - improved loop prevention (becomes incompatible with earlier versions);

*) incorporated all the bug fixes since v3.27;

What's new in 4.0beta3:

*) added support for 802.11n atheros based wireless cards;
*) added ability to run other OSs in MetaROUTERs;
*) console: Lua scripting language.
*) console: added nstreme-dual OIDs;
*) incorporated all the bug fixes since v3.23;

What's new in 4.0beta2:

*) console: added 'without-paging' argument to 'monitor' commands;
*) console: now 'without-paging' and 'interval' arguments in of 'print'
commands work together. Printing can be stopped by pressing 'q' or
ctrl-c, any other key triggers printing;
*) incorporated all the bug fixes since v3.22;
*) fixed TFTP server logging;
*) fixed problem - "/system upgrade" did not show proper package
architecture and was unable to fetch new packages;

What's new in 4.0beta1:

*) added support for MetaROUTERs;
*) all test packages are regular ones;
*) console - can mix named and unnamed arguments, can use names for unnamed
argument values. For example all of the following commands are
accepted now:
/ping 10.11.12.13 count=4
/ping address=10.11.12.13 count=4
/ping count=4 10.11.12.13

share aja neh bos...

gw upgrade ke 4.0 ada rb yg langsung wirelesnya disable, dan ke versi 4.1 juga demikian

dah upgrade ke 4.1 iseng2 cobain simple queue nya. kok ga jalan ya. padahal queue tree yang aku pake dah disable. ada yg punya masalah sama ga