Tolongin saya, masih awam, kesulitan setting mikrotik

**Pakdekabul** · 31-03-2009, 16:27

Saya pakai speedy yang ingin saya share dengan tetangga, saya mempunyai Router board RB433 dengan satu mini PCI dan satu buah akses point Senao ECB 3601.
konfigurasi I:
Speedy ==> Switch==>mikrotik+mini PCI==>client
konfigurasi II:
Speedy ==> Switch==>SEnao ECB 3610==>client

Saat ini wireless di set pada fungsi AP-bridge (configurasi I), dan bisa berfungsi namun speed saat dipakai download hanya 10KB/s.
jika menggunakan AP senao langsung (konfigurasi II) kecepatan D/L bisa mencapai 110KB/s.

Yang ingin ditanyakan apakah ada setting di mikrotik yang salah sehingga ada kesan dibatasi, padahal Simple Queue nggak di aktifkan. batasan lain juga dibuat unlimited.

Terima kasih atas bantuannya.

**donipermono1982** · 01-04-2009, 09:23

coba copas konfigurasinya. biar rekan2 di sini lebih mudah guidenya Click here to enlarge

**ripmanis** · 01-04-2009, 10:02

ini gak ada ngaruh ma speed, cuman mungkin untuk efisiensi bisa konfig macam gini gan :

Speedy ==> mikrotik+mini PCI==>client

kemudian juga minipci tipe apa (pengen tau juga hihihi) Click here to enlarge

trus yang paling penting juga seperti kata juragan doni, scriptnya gimana..langsung copas biar bisa diselesaikan secara adat.. Click here to enlarge

**ripmanis** · 01-04-2009, 10:05

Originally Posted by Pakdekabul

Saat ini wireless di set pada fungsi AP-bridge (configurasi I)

emang harus AP-bridge ya !? gak bisa AP aja gitu ? maklum gak pernah pake fungsi wirelessnya mirkutik.. nyubi pula.. Click here to enlarge

**xeon** · 01-04-2009, 23:28

Originally Posted by ripmanis

emang harus AP-bridge ya !? gak bisa AP aja gitu ? maklum gak pernah pake fungsi wirelessnya mirkutik.. nyubi pula.. Click here to enlarge

cuma penamaannya aja bro, kalau di mikrotik, ap itu namanya ap-bridge

**ripmanis** · 02-04-2009, 09:42

oalah.. beda nama sama rasa toh..
jadi malluuwww Click here to enlarge

**Pakdekabul** · 02-04-2009, 16:36

Terima kasih atas response teman-teman,
Saya menggunakan mini PCI Senao/Engenius EMP 8602-S Plus. antenna sectoral 19dbi 120 dgr (lokal).

Maaf (takut salah), saya biasa setting menggunakan WinBox, untuk copy paste script pilih menu yang mana saja bingung. tapi akan saya coba lagi nanti akan saya post semua setting yang ada. makasih sebelumnya.

Tolong aku harus pakai cara apa yang bisa tampilkan semua script di Rb saya.

tks

**indra6191** · 02-04-2009, 16:49

coba di print screen aja gan.... Click here to enlarge

**Pakdekabul** · 02-04-2009, 16:58

Oya, Untuk boss ripmanis,
saya menggunakan switch untuk akses komputer saya ke RB, karena RB saya pasang di atas tower,

Makasih.

**indra6191** · 02-04-2009, 17:04

Mksdnya

kompie ==> switch ==> RB ???

**dirman** · 02-04-2009, 20:42

Originally Posted by Pakdekabul

Terima kasih atas response teman-teman,
Saya menggunakan mini PCI Senao/Engenius EMP 8602-S Plus. antenna sectoral 19dbi 120 dgr (lokal).

Maaf (takut salah), saya biasa setting menggunakan WinBox, untuk copy paste script pilih menu yang mana saja bingung. tapi akan saya coba lagi nanti akan saya post semua setting yang ada. makasih sebelumnya.

Tolong aku harus pakai cara apa yang bisa tampilkan semua script di Rb saya.

tks

Open New Terminal di Winbox
ketik export
klik copy all
pastein deh disini
Click here to enlarge

**ripmanis** · 03-04-2009, 10:47

Originally Posted by indra6191

Mksdnya

kompie ==> switch ==> RB ???

oo..iya juga sich.. biar mirkutiknya bisa dikontrol hehehhe... mallluuwwww Click here to enlarge

**ripmanis** · 03-04-2009, 10:54

om pakde pake fitur apa di mirkutik ? nah itu yg dimaksud ma om don untuk di copas..

misalnya om pakde pake mangle, manglenya di print aja lewat winbox.. trus di copas dimari..
di winbox masup new terminal, trus ketik aja :

/ip firewall mangle print

hasilnya copas disini atau kirim aja pake tiki Click here to enlarge

atau emang masalah di EMP 8602-S Plus ya ?!
pernah baca soal EMP 8602-S Plus (mbuh dimana lupa) waktu review produk2 engenius, dan sempet ketemu soal EMP 8602-S Plus sebagian mempermasalahkan kualitas EMP 8602-S Plus.
tapi skali lagi aku lupa dimana baca itu Click here to enlarge

**Pakdekabul** · 06-04-2009, 07:35

[adminkabul@Pamor] > ip firewall mangle print

Flags: X - disabled, I - invalid, D - dynamic
0 chain=prerouting action=accept src-address-list=""

/interface bridge
add admin-mac=00:1F:3C:85:3A:C8 ageing-time=5m arp=enabled auto-mac=yes \
comment="" disabled=no forward-delay=15s max-message-age=20s mtu=1500 \
name=bridge priority=0x8000 protocol-mode=none transmit-hold-count=6

/interface ethernet
set 0 arp=enabled auto-negotiation=yes comment="" disabled=no full-duplex=yes \
mac-address=00:0C:42:0E:B2:0E mtu=1500 name=Local speed=100Mbps
set 1 arp=enabled auto-negotiation=yes bandwidth=unlimited/unlimited comment=\
"" disabled=yes full-duplex=yes mac-address=00:0C:42:0E:B2:0F \
master-port=none mtu=1500 name=Publik speed=100Mbps
set 2 arp=enabled auto-negotiation=yes bandwidth=unlimited/unlimited comment=\
"" disabled=yes full-duplex=yes mac-address=00:0C:42:0E:B2:10 \
master-port=none mtu=1500 name=ether3 speed=100Mbps

/interface wireless

/ip pool
add name=pool5 ranges=192.168.101.201-192.168.101.254

/ip dhcp-server
add address-pool=pool5 authoritative=after-2sec-delay bootp-support=static \
disabled=no interface=wlan3 lease-time=3d name=dhcp5

/port
set 0 baud-rate=9600 data-bits=8 flow-control=none name=serial0 parity=none \
stop-bits=1

/queue simple
add burst-limit=0/0 burst-threshold=0/0 burst-time=0s/0s comment="" \
direction=both disabled=no dst-address=0.0.0.0/0 interface=all limit-at=\
64000/64000 max-limit=64000/64000 name="Gatot Kiarda 5" parent=none \
priority=8 queue=default-small/default-small target-addresses=\
192.168.101.5/32 total-queue=default-small

/queue tree
add burst-limit=0 burst-threshold=0 burst-time=0s disabled=no limit-at=0 \
max-limit=0 name=queue1 packet-mark="" parent=global-in priority=8 queue=\
default

/routing bgp instance
set default as=65530 client-to-client-reflection=yes comment="" disabled=no \
ignore-as-path-len=no name=default out-filter="" redistribute-connected=\
no redistribute-ospf=no redistribute-other-bgp=no redistribute-rip=no \
redistribute-static=no router-id=0.0.0.0
/routing ospf area
add area-id=0.0.0.0 authentication=none disabled=no name=backbone type=\
default

/interface bridge broute
add action=accept chain=brouting comment="" disabled=no in-interface=Local
/interface bridge nat
add action=accept chain=srcnat comment="" disabled=no

/interface bridge port
add bridge=bridge comment="" disabled=no edge=auto external-fdb=auto horizon=\
none interface=Local path-cost=10 point-to-point=auto priority=0x80

/interface bridge settings
set use-ip-firewall=no use-ip-firewall-for-vlan=no

/interface wireless access-list
add ap-tx-limit=0 authentication=yes client-tx-limit=0 comment="" disabled=no \
forwarding=yes interface=all mac-address=00:02:6F:4A:C8:9C private-algo=\
none private-key="" private-pre-shared-key="" signal-range=-120.120
add ap-tx-limit=0 authentication=yes client-tx-limit=0 comment="" disabled=no \

/interface wireless align
set active-mode=yes audio-max=-20 audio-min=-100 audio-monitor=\
00:00:00:00:00:00 filter-mac=00:00:00:00:00:00 frame-size=300 \
frames-per-second=25 receive-all=no ssid-all=no

/interface wireless connect-list
add area-prefix="" comment="" connect=yes disabled=no interface=wlan2 \
mac-address=00:1F:3C:85:3A:C8 security-profile=default signal-range=\
-120.120 ssid=""

/ip address
add address=192.168.101.4/24 broadcast=192.168.101.255 comment="" disabled=no \
interface=Local network=192.168.101.0
add address=192.168.101.6/24 broadcast=192.168.101.255 comment="" disabled=no \
interface=wlan3 network=192.168.101.0

/ip arp
add address=192.168.101.57 comment="" disabled=no interface=bridge \
mac-address=00:19:7E:C1:B1:70

/ip dhcp-server config
set store-leases-disk=5m

/ip dhcp-server lease
add address=192.168.101.24 client-id=1:0:19:21:63:10:e4 comment="" disabled=\
no mac-address=00:19:21:63:10:E4
/ip dhcp-server network
add address=192.168.101.0/24 comment="" dns-server=\
202.134.1.10,203.130.208.18,202.134.0.155,203.130. 196.5 gateway=\
192.168.101.1 netmask=27

/ip dns
set allow-remote-requests=yes cache-max-ttl=1w cache-size=2048KiB \
max-udp-packet-size=512 primary-dns=202.134.1.10 secondary-dns=\
202.134.0.155

/ip dns static
add address=192.168.101.56 disabled=no name=bbs3ceria ttl=1d

/ip firewall mangle
add action=accept chain=prerouting comment="" disabled=no src-address-list=""

/ip firewall nat
add action=masquerade chain=srcnat comment="" disabled=no out-interface=Local

/ip firewall service-port
set ftp disabled=no ports=21
set tftp disabled=no ports=69
set irc disabled=no ports=6667
set h323 disabled=no
set sip disabled=no
set pptp disabled=no

/ip proxy
set always-from-cache=no cache-administrator=kabul cache-drive=system \
cache-hit-dscp=4 cache-on-disk=no enabled=no max-cache-size=none \
max-client-connections=5 max-fresh-time=3d max-server-connections=600 \
parent-proxy=0.0.0.0 parent-proxy-port=0 port=8080 serialize-connections=\
no src-address=0.0.0.0

/ip route
add disabled=no distance=1 dst-address=0.0.0.0/0 gateway=192.168.101.1 scope=\
30 target-scope=10
add check-gateway=ping comment="" disabled=no distance=1 dst-address=\
192.168.101.0/24 gateway=192.168.101.1 routing-mark=main scope=30 \
target-scope=10

/ip socks
set connection-idle-timeout=2m enabled=no max-connections=200 port=1080

/ip traffic-flow
set active-flow-timeout=30m cache-entries=4k enabled=yes \
inactive-flow-timeout=15s interfaces=all

/queue interface
set Local queue=ethernet-default
set Publik queue=ethernet-default
set ether3 queue=ethernet-default
set wlan1 queue=wireless-default
set bridge queue=default-small
set wlan2 queue=ethernet-default
set wlan3 queue=wireless-default

/routing filter
add action=passthrough chain=dynamic-in comment="" disabled=no invert-match=\
no

/system identity
set name=Pamor

/tool graphing
set store-every=5min
/tool graphing interface
add allow-address=0.0.0.0/0 disabled=no interface=all store-on-disk=no
add allow-address=192.168.101.6/32 disabled=no interface=all store-on-disk=no

/tool graphing queue
add allow-address=192.168.101.63/32 allow-target=yes disabled=no \
simple-queue="Ade Sumant" store-on-disk=no

/tool mac-server
add disabled=no interface=all

/tool mac-server ping
set enabled=yes

/tool netwatch
add comment="" disabled=no down-script="" host=192.168.101.49 interval=1m \
timeout=1s up-script=""

[adminkabul@Pamor] >

**dirman** · 06-04-2009, 08:04

kayaknya masalah bridge nih si bos.
coba liat2 kesini :

mudah2an membantu

Thread: Tolongin saya, masih awam, kesulitan setting mikrotik

LinkBack

Thread Tools

Tolongin saya, masih awam, kesulitan setting mikrotik

Thread Information

Users Browsing this Thread

Similar Threads

blok p2p di mikrotik 2.9.50 masih tembus

(ASK)Aduh Masih bingung nie dengan setting (installasi wireless mikrotik outdoor )

masih awam..

kesulitan mail yahoo dan YM

kk tolongin script mikrotik untuk BF2 Online donk ^_^

Posting Permissions