Follow us on...
Follow us on G+ Follow us on Twitter Follow us on Facebook Watch us on YouTube
Register
Page 7 of 9 FirstFirst ... 56789 LastLast
Results 91 to 105 of 127
  1. #91
    Status
    Offline
    supono's Avatar
    Baru Gabung
    Join Date
    Sep 2009
    Posts
    3
    Reviews
    Read 0 Reviews
    Downloads
    14
    Uploads
    0
    Feedback Score
    0
    IMHO, kalau menurut saya lebih baik belajarnya justru di mulai dari satu persatu. Buat apa kita bisa setting tapi sebetulnya ga tau arti atau maksudnya ataupun sebetulnya hanya tebak-tebak saja. Seperti belajar OSPF, ya tuntaskan saja belajarnya, mulai apa itu OSPF yang sudah di uraikan di awal, terus kenapa harus di bagi menjadi beberapa area, apa itu virtual link, LSA (syukur syukur sampai paham jenis-jenisnya dan karakteristiknya), setelah OSPF mungkin di bahas RIP dengan detailnya, baru kemudian di bandingkan antara OSPF dan RIP, setelah itu lanjut ke BGP dan MPLS. Setelah semua di pahami barulah membuat jaringan yang kompleks melibatkan semua.

    Mungkin itu sedikit saran karena saya juga belajar disini. menunggu master-master turun gunung.

  2. The Following 2 Users Say Thank You to supono For This Useful Post:


  3. #92
    Status
    Offline
    tundra_nux's Avatar
    Calon Member
    Join Date
    Jun 2009
    Location
    Bogor, Jawa Barat
    Posts
    87
    Reviews
    Read 0 Reviews
    Downloads
    0
    Uploads
    0
    Feedback Score
    0
    Click here to enlarge Originally Posted by supono Click here to enlarge
    IMHO, kalau menurut saya lebih baik belajarnya justru di mulai dari satu persatu. Buat apa kita bisa setting tapi sebetulnya ga tau arti atau maksudnya ataupun sebetulnya hanya tebak-tebak saja. Seperti belajar OSPF, ya tuntaskan saja belajarnya, mulai apa itu OSPF yang sudah di uraikan di awal, terus kenapa harus di bagi menjadi beberapa area, apa itu virtual link, LSA (syukur syukur sampai paham jenis-jenisnya dan karakteristiknya), setelah OSPF mungkin di bahas RIP dengan detailnya, baru kemudian di bandingkan antara OSPF dan RIP, setelah itu lanjut ke BGP dan MPLS. Setelah semua di pahami barulah membuat jaringan yang kompleks melibatkan semua.

    Mungkin itu sedikit saran karena saya juga belajar disini. menunggu master-master turun gunung.
    Yup betul banget om supono. Terima kasih atas masukannya.
    Sebenarnya TS yang sudah dibuat ini sebagai awal dari pembahasan yang diinginkan seperti yg disebutkan oleh om supono. Dengan harapan dari teman2 FMI bisa bertukar pikiran di TS ini. Seperti dipaparkan dengan contoh kasus OSPF, RIP dan BGP. Kami berharap temen2 FMI bisa mencoba dan menemukan permasalahan. Melalui permasalahan yg ada, maka pastinya temen2 mencari bahan untuk memecahkan permasalahan itu, jika berhasil memecahkan masalah tsb bisa sharing di thread ini.

  4. The Following User Says Thank You to tundra_nux For This Useful Post:


  5. #93
    Status
    Offline
    brutuz_1's Avatar
    VIP Member
    Join Date
    Feb 2010
    Posts
    790
    Reviews
    Read 0 Reviews
    Downloads
    3
    Uploads
    0
    Feedback Score
    0
    Click here to enlarge Originally Posted by brutuz_1 Click here to enlarge
    haduhh..... nganu om, maaf, saya agak melenceng dari topologi, saya malah konekin R4.1 via R3.1 (192.168.40.0/30), tapi saya rasa OSPF juga yah... hehehe gk papa deh tar saya rubah lagi...
    oh ya om Tun, mau tanya deh sekalian ada yg belum paham kalo hanya baca2 manualnya saja...
    - nentuin nilai cost dari mana yah... baca manualnya dikit banget penjelasannya...Click here to enlarge
    - di BGP ada AS=100 dan AS=200, itu ada nilai baku atau hanya sekedar penanda id saja, and sekalian nentuin "area" (area1,backbone) gmn ?,mohon pencerahanya ya Om...Click here to enlarge
    thx b4 ...)
    sundul ah...
    mohon pencerahannya om Tun... lom paham bgt...Click here to enlarge

  6. #94
    Status
    Offline
    tundra_nux's Avatar
    Calon Member
    Join Date
    Jun 2009
    Location
    Bogor, Jawa Barat
    Posts
    87
    Reviews
    Read 0 Reviews
    Downloads
    0
    Uploads
    0
    Feedback Score
    0
    Click here to enlarge Originally Posted by firdian.cavalera Click here to enlarge
    colek mas tundra_nux ... kira2 konfigurasinya bener ga ya?

    Menjawab colekan dari om firdian.cavalera.. Click here to enlarge


    Konfigurasi sudah bener om firdian.cavalera, cuma saya ubah sedikit2 saja dan dioprek kembali sekaligus dibantu oleh om brutuz_1, maka kami merevisi script tersebut menjadi berikut disesuaikan dengan perbaikan ip address pada topology di bawah ini

    Click here to enlarge

    R1

    system identity set name=R1
    ip address add address=192.168.1.37/24 interface=ether1
    ip address add address=10.10.10.1/30 interface=ether2
    ip address add address=10.10.11.1/30 interface=ether3
    ip firewall nat add action=masquerade out-interface=ether1 chain=srcnat
    ip route add gateway=192.168.1.18
    ip dns set servers=8.8.8.8,8.8.4.4 allow-remote-requests=yes
    routing ospf interface add interface=ether2 cost=10
    routing ospf interface add interface=ether3 cost=50

    routing ospf instance set 0 distribute-default=always-as-type-1 redistribute-connected=as-type-1 redistribute-static=as-type-1

    routing ospf network add network=10.10.10.0/30 area=backbone
    routing ospf network add network=10.10.11.0/30 area=backbone



    R2

    system identity set name=R2
    ip address add address=10.10.10.2/30 interface=ether1
    ip address add address=10.10.12.2/30 interface=ether2
    ip address add address=10.10.13.2/30 interface=ether3
    ip dns set servers=8.8.8.8,8.8.4.4 allow-remote-requests=yes

    routing ospf interface add interface=ether1 cost=10
    routing ospf interface add interface=ether2 cost=100

    routing ospf instance set 0 distribute-default=never redistribute-connected=as-type-1 redistribute-static=as-type-1 redistribute-rip=as-type-1

    routing ospf network add network=10.10.10.0/30 area=backbone
    routing ospf network add network=10.10.12.0/30 area=backbone

    routing rip set distribute-default=always redistribute-static=yes redistribute-connected=yes redistribute-ospf=yes metric-static=15

    routing rip interface add interface=ether3
    routing rip neighbor add address=10.10.13.1
    routing rip network add network=10.10.13.0/30



    R3

    system identity set name=R3
    ip address add address=10.10.11.2/30 interface=ether1
    ip address add address=10.10.12.1/30 interface=ether2
    ip address add address=192.168.20.1/24 interface=ether3
    ip dns set servers=8.8.8.8,8.8.4.4 allow-remote-requests=yes

    routing ospf interface add interface=ether1 cost=50
    routing ospf interface add interface=ether2 cost=100

    routing ospf instance set 0 distribute-default=never redistribute-connected=as-type-1 redistribute-static=as-type-1

    routing ospf network add network=10.10.11.0/30 area=backbone
    routing ospf network add network=10.10.11.0/30 area=backbone



    R1.1

    system identity set name=R1.1
    ip address add address=10.10.13.1/30 interface=ether1
    ip address add address=10.10.14.1/30 interface=ether2
    ip address add address=10.10.15.1/30 interface=ether3
    ip dns set servers=8.8.8.8,8.8.4.4 allow-remote-requests=yes

    routing rip set distribute-default=never redistribute-static=yes redistribute-connected=yes redistribute-ospf=yes

    routing rip interface add interface=ether1
    routing rip neighbor add address=10.10.13.2
    routing rip network add network=10.10.13.0/30
    routing ospf interface add interface=ether2 cost=10
    routing ospf interface add interface=ether3 cost=50

    routing ospf instance set 0 distribute-default=always-as-type-1 redistribute-connected=as-type-1 redistribute-static=as-type-1 redistribute-rip=as-type-1

    routing ospf area add area-id=0.0.0.1 name=area1
    routing ospf network add network=10.10.14.0/30 area=area1
    routing ospf network add network=10.10.15.0/30 area=area1



    R2.1

    system identity set name=R2.1
    ip address add address=10.10.14.2/30 interface=ether1
    ip address add address=10.10.16.1/30 interface=ether2
    ip address add address=192.168.40.1/24 interface=ether2
    ip dns set servers=8.8.8.8,8.8.4.4 allow-remote-requests=yes

    routing ospf interface add interface=ether1 cost=10
    routing ospf interface add interface=ether2 cost=100
    routing ospf interface add interface=ether3 cost=10

    routing ospf instance set 0 distribute-default=never redistribute-connected=as-type-1 redistribute-static=as-type-1

    routing ospf area add area-id=0.0.0.1 name=area1
    routing ospf network add network=10.10.14.0/30 area=area1
    routing ospf network add network=10.10.14.0/30 area=area1



    R3.1

    system identity set name=R3.1
    ip address add address=10.10.15.2/30 interface=ether1
    ip address add address=10.10.16.2/30 interface=ether2
    ip address add address=192.168.30.1/30 interface=ether3
    ip dns set servers=8.8.8.8,8.8.4.4 allow-remote-requests=yes

    routing ospf interface add interface=ether1 cost=50
    routing ospf interface add interface=ether2 cost=100

    routing ospf instance set 0 distribute-default=never redistribute-connected=as-type-1 redistribute-static=as-type-1

    routing ospf area add area-id=0.0.0.1 name=area1
    routing ospf network add network=10.10.15.0/30 area=area1
    routing ospf network add network=10.10.16.0/30 area=area1



    R4.1

    system identity set name=R4.1
    ip address add address=192.168.40.2/24 interface=ether1
    ip address add address=10.10.20.1/30 interface=ether2
    ip dns set servers=8.8.8.8,8.8.4.4 allow-remote-requests=yes


    routing ospf instance set 0 distribute-default=never redistribute-bgp=as-type-1
    routing bgp instance set 0 as=200 router-id=2.2.2.2 redistribute-ospf=yes
    routing bgp peer add remote-address=10.10.20.2 remote-as=100 default-originate=always

    routing bgp network add network=10.10.14.0/30
    routing bgp network add network=10.10.16.0/30
    routing bgp network add network=192.168.40.0/24

    routing ospf area add area-id=0.0.0.1 name=area1
    routing ospf network add network=10.10.20.0/30 area=area1
    routing ospf network add network=192.168.40.0/24 area=area1

    routing ospf interface add interface=ether1 cost=10
    routing ospf interface add interface=ether2 cost=10



    R5.1

    system identity set name=R5.1
    ip address add address=10.10.20.2/30 interface=ether1
    ip address add address=192.168.100.1/24 interface=ether2
    ip address add address=192.168.100.1/24 interface=ether3
    ip dns set servers=8.8.8.8,8.8.4.4 allow-remote-requests=yes

    routing bgp instance set 0 as=100 router-id=2.2.2.2
    routing bgp peer add remote-address=10.10.20.1 remote-as=200


    routing bgp network add network=192.168.100.0/24
    routing bgp network add network=192.168.110.0/24

    Silahkan dicoba kembali..

  7. #95
    Status
    Offline
    kodox's Avatar
    Member
    Join Date
    Jul 2010
    Location
    Karawang, Jabar
    Posts
    206
    Reviews
    Read 0 Reviews
    Downloads
    0
    Uploads
    0
    Feedback Score
    0
    Ikutan nimbrung ah...

    Masih belum ngerti-ngerti juga Click here to enlarge, sapa tau kalo dibaca lagi balik-bolak bisa ngerti. Hehehehe....

    Ijin gelar tiker sambil ngupi ya gan...? Click here to enlarge

  8. The Following User Says Thank You to kodox For This Useful Post:


  9. #96
    Status
    Offline
    tundra_nux's Avatar
    Calon Member
    Join Date
    Jun 2009
    Location
    Bogor, Jawa Barat
    Posts
    87
    Reviews
    Read 0 Reviews
    Downloads
    0
    Uploads
    0
    Feedback Score
    0
    Click here to enlarge Originally Posted by kodox Click here to enlarge
    Ikutan nimbrung ah...

    Masih belum ngerti-ngerti juga Click here to enlarge, sapa tau kalo dibaca lagi balik-bolak bisa ngerti. Hehehehe....

    Ijin gelar tiker sambil ngupi ya gan...? Click here to enlarge
    Silahkan gan.. dicoba2 dulu gan..

  10. #97
    Status
    Offline
    supono's Avatar
    Baru Gabung
    Join Date
    Sep 2009
    Posts
    3
    Reviews
    Read 0 Reviews
    Downloads
    14
    Uploads
    0
    Feedback Score
    0
    Hanya mencoba copy paste script yang ada. Maaf lagi miskin bw jadi agak lama


  11. The Following 3 Users Say Thank You to supono For This Useful Post:


  12. #98
    Status
    Offline
    tundra_nux's Avatar
    Calon Member
    Join Date
    Jun 2009
    Location
    Bogor, Jawa Barat
    Posts
    87
    Reviews
    Read 0 Reviews
    Downloads
    0
    Uploads
    0
    Feedback Score
    0
    Click here to enlarge Originally Posted by supono Click here to enlarge
    Hanya mencoba copy paste script yang ada. Maaf lagi miskin bw jadi agak lama


    Terima kasih mas Supono sudah mengkoreksi dan sudah dibuatkan video tutorialnya.. maaf salah tulis beberapa network dan interface..
    Knp Router R1 tidak bisa konek ke 192.168.40.2 karena pada R2.1 saya blm tuliskan routing ospf network add network=192.168.40.0/24 area=area1
    dan pada R5.1 router-id harusnya 1.1.1.1

    Berikut ini revisinya Click here to enlarge

    R1

    system identity set name=R1
    ip address add address=192.168.1.37/24 interface=ether1
    ip address add address=10.10.10.1/30 interface=ether2
    ip address add address=10.10.11.1/30 interface=ether3
    ip firewall nat add action=masquerade out-interface=ether1 chain=srcnat
    ip route add gateway=192.168.1.18

    ip dns set servers=8.8.8.8,8.8.4.4 allow-remote-requests=yes

    routing ospf interface add interface=ether2 cost=10
    routing ospf interface add interface=ether3 cost=50

    routing ospf instance set 0 distribute-default=always-as-type-1 redistribute-connected=as-type-1 redistribute-static=as-type-1

    routing ospf network add network=10.10.10.0/30 area=backbone
    routing ospf network add network=10.10.11.0/30 area=backbone


    R2

    system identity set name=R2
    ip address add address=10.10.10.2/30 interface=ether1
    ip address add address=10.10.12.2/30 interface=ether2
    ip address add address=10.10.13.2/30 interface=ether3

    ip dns set servers=8.8.8.8,8.8.4.4 allow-remote-requests=yes

    routing ospf interface add interface=ether1 cost=10
    routing ospf interface add interface=ether2 cost=100

    routing ospf instance set 0 distribute-default=never redistribute-connected=as-type-1 redistribute-static=as-type-1 redistribute-rip=as-type-1

    routing ospf network add network=10.10.10.0/30 area=backbone
    routing ospf network add network=10.10.12.0/30 area=backbone

    routing rip set distribute-default=always redistribute-static=yes redistribute-connected=yes redistribute-ospf=yes metric-static=15

    routing rip interface add interface=ether3
    routing rip neighbor add address=10.10.13.1
    routing rip network add network=10.10.13.0/30


    R3

    system identity set name=R3
    ip address add address=10.10.11.2/30 interface=ether1
    ip address add address=10.10.12.1/30 interface=ether2
    ip address add address=192.168.20.1/24 interface=ether3

    ip dns set servers=8.8.8.8,8.8.4.4 allow-remote-requests=yes

    routing ospf interface add interface=ether1 cost=50
    routing ospf interface add interface=ether2 cost=100

    routing ospf instance set 0 distribute-default=never redistribute-connected=as-type-1 redistribute-static=as-type-1

    routing ospf network add network=10.10.11.0/30 area=backbone
    routing ospf network add network=10.10.12.0/30 area=backbone


    R1.1

    system identity set name=R1.1
    ip address add address=10.10.13.1/30 interface=ether1
    ip address add address=10.10.14.1/30 interface=ether2
    ip address add address=10.10.15.1/30 interface=ether3
    ip dns set servers=8.8.8.8,8.8.4.4 allow-remote-requests=yes

    routing rip set distribute-default=never redistribute-static=yes redistribute-connected=yes redistribute-ospf=yes

    routing rip interface add interface=ether1
    routing rip neighbor add address=10.10.13.2
    routing rip network add network=10.10.13.0/30
    routing ospf interface add interface=ether2 cost=10
    routing ospf interface add interface=ether3 cost=50

    routing ospf instance set 0 distribute-default=always-as-type-1 redistribute-connected=as-type-1 redistribute-static=as-type-1 redistribute-rip=as-type-1

    routing ospf area add area-id=0.0.0.1 name=area1
    routing ospf network add network=10.10.14.0/30 area=area1
    routing ospf network add network=10.10.15.0/30 area=area1



    R2.1

    system identity set name=R2.1
    ip address add address=10.10.14.2/30 interface=ether1
    ip address add address=10.10.16.1/30 interface=ether2
    ip address add address=192.168.40.1/24 interface=ether3

    ip dns set servers=8.8.8.8,8.8.4.4 allow-remote-requests=yes

    routing ospf interface add interface=ether1 cost=10
    routing ospf interface add interface=ether2 cost=100
    routing ospf interface add interface=ether3 cost=10

    routing ospf instance set 0 distribute-default=never redistribute-connected=as-type-1 redistribute-static=as-type-1

    routing ospf area add area-id=0.0.0.1 name=area1
    routing ospf network add network=10.10.14.0/30 area=area1
    routing ospf network add network=10.10.16.0/30 area=area1
    routing ospf network add network=192.168.40.0/24 area=area1



    R3.1

    system identity set name=R3.1
    ip address add address=10.10.15.2/30 interface=ether1
    ip address add address=10.10.16.2/30 interface=ether2
    ip address add address=192.168.30.1/30 interface=ether3
    ip dns set servers=8.8.8.8,8.8.4.4 allow-remote-requests=yes

    routing ospf interface add interface=ether1 cost=50
    routing ospf interface add interface=ether2 cost=100

    routing ospf instance set 0 distribute-default=never redistribute-connected=as-type-1 redistribute-static=as-type-1

    routing ospf area add area-id=0.0.0.1 name=area1
    routing ospf network add network=10.10.15.0/30 area=area1
    routing ospf network add network=10.10.16.0/30 area=area1


    R4.1

    system identity set name=R4.1
    ip address add address=192.168.40.2/24 interface=ether1
    ip address add address=10.10.20.1/30 interface=ether2

    ip dns set servers=8.8.8.8,8.8.4.4 allow-remote-requests=yes

    routing ospf instance set 0 distribute-default=never redistribute-bgp=as-type-1
    routing bgp instance set 0 as=200 router-id=2.2.2.2 redistribute-ospf=yes
    routing bgp peer add remote-address=10.10.20.2 remote-as=100 default-originate=always

    routing bgp network add network=10.10.14.0/30
    routing bgp network add network=10.10.16.0/30
    routing bgp network add network=192.168.40.0/24

    routing ospf area add area-id=0.0.0.1 name=area1
    routing ospf network add network=10.10.20.0/30 area=area1
    routing ospf network add network=192.168.40.0/24 area=area1

    routing ospf interface add interface=ether1 cost=10
    routing ospf interface add interface=ether2 cost=10



    R5.1

    system identity set name=R5.1
    ip address add address=10.10.20.2/30 interface=ether1
    ip address add address=192.168.100.1/24 interface=ether2
    ip address add address=192.168.110.1/24 interface=ether3

    ip dns set servers=8.8.8.8,8.8.4.4 allow-remote-requests=yes

    routing bgp instance set 0 as=100 router-id=1.1.1.1
    routing bgp peer add remote-address=10.10.20.1 remote-as=200

    routing bgp network add network=192.168.100.0/24
    routing bgp network add network=192.168.110.0/24


    *** Good Luck ***

    Jika ada yang ditanyakan silahkan join di TS
    Last edited by tundra_nux; 03-02-2014 at 11:34.

  13. The Following User Says Thank You to tundra_nux For This Useful Post:


  14. #99
    Status
    Offline
    firdian.cavalera's Avatar
    Newbie
    Join Date
    Jun 2009
    Location
    Semarang
    Posts
    52
    Reviews
    Read 0 Reviews
    Downloads
    0
    Uploads
    0
    Feedback Score
    0
    Betul, cuma setting2 doang nanti kalau ketemu kasus lain jadi bingung. Saya belajar teori/konsep routing justru dari buku 100% connected. Harus ada pengetahuan juga kapan kita menggunakan routing statik dan kapan kita menggunakan routing dinamis, ini yang tidak pernah dibahas di forum manapun. Sebagai contoh kita bisa menggunakan routing OSPF di router mikrotik apa saja tapi harus tau kapan kita menggunakan routing statik dan kapan kita menggunakan rouiting dinamis. Jangan sampai kita salah penerapan, menggunakan routing OSPF di RB450 untuk backbone.


    Click here to enlarge Originally Posted by supono Click here to enlarge
    IMHO, kalau menurut saya lebih baik belajarnya justru di mulai dari satu persatu. Buat apa kita bisa setting tapi sebetulnya ga tau arti atau maksudnya ataupun sebetulnya hanya tebak-tebak saja. Seperti belajar OSPF, ya tuntaskan saja belajarnya, mulai apa itu OSPF yang sudah di uraikan di awal, terus kenapa harus di bagi menjadi beberapa area, apa itu virtual link, LSA (syukur syukur sampai paham jenis-jenisnya dan karakteristiknya), setelah OSPF mungkin di bahas RIP dengan detailnya, baru kemudian di bandingkan antara OSPF dan RIP, setelah itu lanjut ke BGP dan MPLS. Setelah semua di pahami barulah membuat jaringan yang kompleks melibatkan semua.

    Mungkin itu sedikit saran karena saya juga belajar disini. menunggu master-master turun gunung.

  15. #100
    Status
    Offline
    firdian.cavalera's Avatar
    Newbie
    Join Date
    Jun 2009
    Location
    Semarang
    Posts
    52
    Reviews
    Read 0 Reviews
    Downloads
    0
    Uploads
    0
    Feedback Score
    0
    Ayo teoriya juga di share biar mantep hehehe

  16. #101
    Status
    Offline
    hawk's Avatar
    Baru Gabung
    Join Date
    Feb 2014
    Location
    Bandung
    Posts
    2
    Reviews
    Read 0 Reviews
    Downloads
    0
    Uploads
    0
    Feedback Score
    0
    Makasi atas sharing ilmunya para Brother sekalian... ane dapet ilmunya

  17. #102
    Status
    Offline
    tundra_nux's Avatar
    Calon Member
    Join Date
    Jun 2009
    Location
    Bogor, Jawa Barat
    Posts
    87
    Reviews
    Read 0 Reviews
    Downloads
    0
    Uploads
    0
    Feedback Score
    0
    Click here to enlarge Originally Posted by hawk Click here to enlarge
    Makasi atas sharing ilmunya para Brother sekalian... ane dapet ilmunya
    Sama2 Brother semoga bermanfaat ya Click here to enlarge

  18. #103
    Status
    Offline
    erunix_unix's Avatar
    Newbie
    Join Date
    Feb 2008
    Location
    Indonesia
    Posts
    22
    Reviews
    Read 0 Reviews
    Downloads
    0
    Uploads
    0
    Feedback Score
    0
    Click here to enlarge Originally Posted by tundra_nux Click here to enlarge
    Topologinya seperti apa Om firdian.cavalera? Apa seperti ini om?
    Click here to enlarge
    jika kita mau menggunakan IP client yang ada di R1 (ether 2 = 192.168.10.0/24) di bawa sampai ke client R3 bisa ga gan ? mohon pencerahan.

  19. #104
    Status
    Offline
    andreppti's Avatar
    Newbie
    Join Date
    Dec 2012
    Posts
    55
    Reviews
    Read 0 Reviews
    Downloads
    0
    Uploads
    0
    Feedback Score
    0
    bedanya ospf,bgp sama rip itu gmn ya..?

  20. #105
    Status
    Offline
    si_faisal's Avatar
    Contributor
    Join Date
    Jul 2008
    Location
    Jakarta & Sukabumi
    Posts
    485
    Reviews
    Read 0 Reviews
    Downloads
    0
    Uploads
    0
    Feedback Score
    0
    Click here to enlarge Originally Posted by andreppti Click here to enlarge
    bedanya ospf,bgp sama rip itu gmn ya..?

    ada yang beda di algoritma routing, pemisahan area, cara advertise dll
    Training MikroTik - jagonetwork.id

 

 
Page 7 of 9 FirstFirst ... 56789 LastLast

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Similar Threads

  1. belajar mikrotik
    By Kandar Dinata in forum Beginner Basics
    Replies: 5
    Last Post: 09-05-2012, 21:07
  2. belajar mikrotik
    By bangbross in forum Beginner Basics
    Replies: 3
    Last Post: 31-12-2009, 11:59
  3. Belajar MikroTik via ICS
    By gendon_mikrotik in forum Beginner Basics
    Replies: 0
    Last Post: 19-10-2009, 10:19
  4. [ASK] mao belajar mikrotik..
    By pandoempe in forum Beginner Basics
    Replies: 2
    Last Post: 27-12-2008, 16:07
  5. {ASK} belajar mikrotik
    By indray2j in forum Beginner Basics
    Replies: 2
    Last Post: 04-07-2007, 16:26

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •