Follow us on...
Follow us on G+ Follow us on Twitter Follow us on Facebook Watch us on YouTube
Register
Results 1 to 8 of 8
  1. #1
    Status
    Offline
    tundra_nux's Avatar
    Calon Member
    Join Date
    Jun 2009
    Location
    Bogor, Jawa Barat
    Posts
    87
    Reviews
    Read 0 Reviews
    Downloads
    0
    Uploads
    0
    Feedback Score
    0

    Router neighbor pada RIP ga bisa koneksi ke Internet

    Click here to enlarge

    Saya mau tanya kepada Agan-agan sekalian di FMI, kok dari R2 saya ga bisa ping ke DNS 8.8.8.8 dan ip 192.168.1.21?
    padahal udah saya kasih
    Code:
    ip firewall nat add action=masquerade out-interface=ether3 chain=srcnat
    dan sudah saya kasih gateway 192.168.1.21

    tapi klo di R1 sudah bisa ping ke 8.8.8.8 dan 192.168.1.21

    Mohon masukannya ya Click here to enlarge

    R1
    Code:
    [admin@MikroTik] > ip route print 
    Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme, 
    B - blackhole, U - unreachable, P - prohibit 
     #      DST-ADDRESS        PREF-SRC        GATEWAY-STATE GATEWAY                                       DISTANCE INTERFACE                              
     0 A S  0.0.0.0/0                          reachable     192.168.1.21                                  1        ether2                                 
     1 ADC  10.0.0.0/8         10.0.0.1                                                                    0        ether1                                 
     2 ADr  172.16.0.0/16                      reachable     10.0.0.2                                      120      ether1                                 
     3 ADC  192.168.1.0/24     192.168.1.1                                                                 0        ether2                                 
     4  DC  192.168.1.0/24     192.168.1.37                                                                0        ether3  
    
    
    [admin@MikroTik] > ip firewall nat print 
    Flags: X - disabled, I - invalid, D - dynamic 
     0   chain=srcnat action=masquerade out-interface=ether3 
    
    [admin@MikroTik] > /routing rip interface print 
    Flags: I - invalid, X - disabled, P - passive 
     #    INTERFACE                                              SEND RECEIVE AUTHENTICATION AUTHENTICATION-KEY                                            
     0    ether1                                                 v2   v1-2    none     
    
    [admin@MikroTik] > /routing rip neighbor print 
    Flags: X - disabled 
     #   ADDRESS        
     0   10.0.0.2       
    
    [admin@MikroTik] > /routing rip print 
          distribute-default: never
         redistribute-static: no
      redistribute-connected: yes
           redistribute-ospf: no
            redistribute-bgp: no
              metric-default: 1
               metric-static: 15
            metric-connected: 1
                 metric-ospf: 1
                  metric-bgp: 1
                update-timer: 30s
               timeout-timer: 3m
               garbage-timer: 2m
    
    
    [admin@MikroTik] > /routing rip route print 
    Flags: C - connect, S - static, R - rip, O - ospf, B - bgp 
     #   PREFIX             GATEWAY         FROM            METRIC     TIMEOUT             
     0 C 10.0.0.0/8                                         1         
     1 R 172.16.0.0/16                      10.0.0.2        2          2m47s               
     2 C 192.168.1.0/24
    R2

    Code:
    [admin@MikroTik] > ip address print 
    Flags: X - disabled, I - invalid, D - dynamic 
     #   ADDRESS            NETWORK         BROADCAST       INTERFACE              
     0   10.0.0.2/8         10.0.0.0        10.255.255.255  ether1                 
     1   172.16.0.1/16      172.16.0.0      172.16.255.255  ether2 
    
    [admin@MikroTik] > ip route print 
    Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme, 
    B - blackhole, U - unreachable, P - prohibit 
     #      DST-ADDRESS        PREF-SRC        GATEWAY-STATE GATEWAY                           DISTANCE INTERFACE                 
     0 ADC  10.0.0.0/8         10.0.0.2                                                        0        ether1                    
     1 ADC  172.16.0.0/16      172.16.0.1                                                      0        ether2                    
     2 ADr  192.168.1.0/24                     reachable     10.0.0.1                          120      ether1    
    
    
    [admin@MikroTik] > ip firewall nat print 
    Flags: X - disabled, I - invalid, D - dynamic 
     0   chain=srcnat action=masquerade out-interface=ether1 
    
    [admin@MikroTik] > /routing rip interface print 
    Flags: I - invalid, X - disabled, P - passive 
     #    INTERFACE                                 SEND RECEIVE AUTHENTICATION AUTHENTICATION-KEY                                
     0    ether1                                    v2   v1-2    none    
    
    [admin@MikroTik] > /routing rip neighbor print 
    Flags: X - disabled 
     #   ADDRESS        
     0   10.0.0.1     
    
    [admin@MikroTik] > /routing rip print       
          distribute-default: never
         redistribute-static: no
      redistribute-connected: yes
           redistribute-ospf: no
            redistribute-bgp: no
              metric-default: 1
               metric-static: 15
            metric-connected: 1
                 metric-ospf: 1
                  metric-bgp: 1
                update-timer: 30s
               timeout-timer: 3m
               garbage-timer: 2m
    
    [admin@MikroTik] > /routing rip route print 
    Flags: C - connect, S - static, R - rip, O - ospf, B - bgp 
     #   PREFIX             GATEWAY         FROM            METRIC     TIMEOUT             
     0 C 10.0.0.0/8                                         1         
     1 C 172.16.0.0/16                                      1         
     2 R 192.168.1.0/24                     10.0.0.1        2          2m57s

  2. #2
    Status
    Offline
    arxe's Avatar
    Member Senior
    Join Date
    Sep 2009
    Location
    Kota Tanjungpinang, Indonesia
    Posts
    371
    Reviews
    Read 0 Reviews
    Downloads
    2
    Uploads
    0
    Feedback Score
    0
    tambah kan di r2 di /ip route
    dst-address = 0.0.0.0/0 gateway 10.0.0.1

  3. #3
    Status
    Offline
    tundra_nux's Avatar
    Calon Member
    Join Date
    Jun 2009
    Location
    Bogor, Jawa Barat
    Posts
    87
    Reviews
    Read 0 Reviews
    Downloads
    0
    Uploads
    0
    Feedback Score
    0
    Tetep ga bisa

  4. #4
    Status
    Offline
    vgate's Avatar
    Forum Guru
    Join Date
    Apr 2008
    Posts
    2,624
    Reviews
    Read 0 Reviews
    Downloads
    0
    Uploads
    0
    Feedback Score
    11 (100%)
    pada R1 coba tambahkan :

    /ip firewall nat chain=srcnat action=masquerade src-address=10.0.0.0/24

    atau

    /ip firewall nat chain=srcnat action=masquerade out-interface=ether3

  5. #5
    Status
    Offline
    rgiapratama's Avatar
    Baru Gabung
    Join Date
    Sep 2007
    Posts
    13
    Reviews
    Read 0 Reviews
    Downloads
    0
    Uploads
    0
    Feedback Score
    1 (100%)
    ether2 sama ether3 memang satu subnet ya? di bridge ga? apa ga bingung nanti paketnya kalo ada paket, misal ke 192.168.1.21 dia lewat ether mana (2 ato 3)
    Last edited by rgiapratama; 18-10-2011 at 00:34.

  6. #6
    Status
    Offline
    saktie's Avatar
    Member
    Join Date
    Nov 2007
    Posts
    174
    Reviews
    Read 0 Reviews
    Downloads
    0
    Uploads
    0
    Feedback Score
    0
    RIP=nya buat apa??

    cba routing statik aj dulu...

    btw eth2 ma eth3 itu di bridge??

    Cba d liat lagi dasar2 jaringan kelas A, B, C serta fungsi2nya

  7. #7
    Status
    Offline
    arxe's Avatar
    Member Senior
    Join Date
    Sep 2009
    Location
    Kota Tanjungpinang, Indonesia
    Posts
    371
    Reviews
    Read 0 Reviews
    Downloads
    2
    Uploads
    0
    Feedback Score
    0
    /tool traceroute dari R2 ke 8.8.8.8
    hasil nya bgm ?

  8. #8
    Status
    Offline
    tundra_nux's Avatar
    Calon Member
    Join Date
    Jun 2009
    Location
    Bogor, Jawa Barat
    Posts
    87
    Reviews
    Read 0 Reviews
    Downloads
    0
    Uploads
    0
    Feedback Score
    0
    Click here to enlarge Originally Posted by arxe Click here to enlarge
    tambah kan di r2 di /ip route
    dst-address = 0.0.0.0/0 gateway 10.0.0.1
    Bener harus ditambah /ip route add dst-address = 0.0.0.0/0 gateway 10.0.0.1
    akhirnya bisa, karena tujuan dari R1 kan gateway 10.0.0.1

    ---------- Post added at 10:56 ---------- Previous post was at 10:54 ----------

    Click here to enlarge Originally Posted by vgate Click here to enlarge
    pada R1 coba tambahkan :

    /ip firewall nat chain=srcnat action=masquerade src-address=10.0.0.0/24

    atau

    /ip firewall nat chain=srcnat action=masquerade out-interface=ether3
    pada R1 memang harus dikasih /ip firewall nat chain=srcnat action=masquerade out-interface=ether3 karena akan membungkus ip lokal ke ip public dgn masquerade. Sip gan..thank's

    ---------- Post added at 11:01 ---------- Previous post was at 10:56 ----------

    Click here to enlarge Originally Posted by rgiapratama Click here to enlarge
    ether2 sama ether3 memang satu subnet ya? di bridge ga? apa ga bingung nanti paketnya kalo ada paket, misal ke 192.168.1.21 dia lewat ether mana (2 ato 3)
    Hehe iya gan saya salah kasih pengalamatan IP pada Network di bawah R1 saya revisi jadi sperti gambar dibawah ini. Thank's gan
    Click here to enlarge

    ---------- Post added at 11:05 ---------- Previous post was at 11:01 ----------

    Click here to enlarge Originally Posted by saktie Click here to enlarge
    RIP=nya buat apa??

    cba routing statik aj dulu...

    btw eth2 ma eth3 itu di bridge??

    Cba d liat lagi dasar2 jaringan kelas A, B, C serta fungsi2nya
    Rip hanya skedar coba2 saja gan

    routing static sudah dipelajari

    eth2 dan eth3 tidak di bridge, iya saya salah dalam memberikan pengalamatan ip pada eth2 dan eth3 sama2 satu subnet... thank's gan

    ---------- Post added at 11:08 ---------- Previous post was at 11:05 ----------

    Click here to enlarge Originally Posted by arxe Click here to enlarge
    /tool traceroute dari R2 ke 8.8.8.8
    hasil nya bgm ?
    C:\Documents and Settings\Administrator>tracert 8.8.8.8

    Tracing route to google-public-dns-a.google.com [8.8.8.8]
    over a maximum of 30 hops:

    1 2 ms <1 ms <1 ms 172.16.0.1
    2 1 ms 1 ms 1 ms 10.0.0.1
    3 2 ms 1 ms 1 ms 192.168.1.18

    dari client 172.16.0.2
    saya coba tracert itu hasilnya sperti yg diatas... alhamdulillah sudah konek ke 8.8.8.8
    thank's agan-agan semua yang telah memberikan masukan. Inilah share knowledge yg bermanfaat Click here to enlarge

    ---------- Post added at 11:13 ---------- Previous post was at 11:08 ----------

    [admin@MikroTik] > /routing rip route print
    Flags: C - connect, S - static, R - rip, O - ospf, B - bgp
    # PREFIX GATEWAY FROM METRIC TIMEOUT
    0 C 10.0.0.0/8 1
    1 R 172.16.0.0/16 10.0.0.2 2 2m47s
    2 C 192.168.1.0/24
    Metric bernilai 2 itu sama aja dengan hop ya?? network 172.16.0.0 (hop1) dan network 10.0.0.0 (hop2)

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 16
    Last Post: 09-05-2012, 14:11
  2. cara berbagi koneksi internet ke router lain (metode PPTP)
    By desawonogiri in forum General Networking
    Replies: 14
    Last Post: 14-07-2011, 09:55
  3. Koneksi Internet, Tower bisa dicicil
    By buditan in forum ISP / Network Link
    Replies: 1
    Last Post: 28-05-2010, 11:36
  4. Membatasi klient kita agar tidak bisa share koneksi internet
    By benhajar in forum Wireless Networking
    Replies: 14
    Last Post: 11-06-2009, 20:43

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •